Aratech C3100, polymix4: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)
Volume
(Mbits/sec)
offered 367.20 27.30
measured 367.21 27.28
Load trace
load.trace.scope=sides=server__phases=dec2

The load table shows offered and measured load from server side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)
BHR
(%)
offered 0.00 0.00
measured 0.00 0.00

The server-side hit ratios should always be zero. If a request reaches a server, it is, by definition, a miss.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 440635.00 440658.00 8.83
waiting 0.00 0.00 0.00
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=server__phases=dec2

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 135251.00 139034.00 2290.69
established 135251.00 139034.00 2290.54
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=server__phases=dec2

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
0.00 0.00 876.00
population level trace
populus.level.trace.scope=sides=server__phases=dec2

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)
Volume
(%)
Count
(xact/sec)
Volume
(Mbits/sec)
Count
(xact,M)
Volume
(Gbyte)
"image" 56.85 29.11 208.59 7.94 0.25 1.16
"HTML" 10.78 9.22 39.55 2.52 0.05 0.37
"download" 0.33 8.66 1.21 2.36 0.00 0.35
"other" 16.38 43.69 60.10 11.92 0.07 1.75
all content types 84.34 90.68 309.45 24.74 0.37 3.62
hits 0.00 0.00 0.00 0.00 0.00 0.00
misses 84.34 90.68 309.45 24.74 0.37 3.62
hits and misses 84.34 90.68 309.45 24.74 0.37 3.62
ims/200 0.07 0.03 0.25 0.01 0.00 0.00
ims/304 3.87 0.05 14.19 0.01 0.02 0.00
all ims 3.94 0.08 14.44 0.02 0.02 0.00
cachable 45.81 49.16 168.09 13.41 0.20 1.96
not cachable 38.52 41.52 141.35 11.33 0.17 1.66
cachable and not 84.34 90.68 309.45 24.74 0.37 3.62
fill 45.81 49.16 168.09 13.41 0.20 1.96
reload 10.80 8.05 39.62 2.20 0.05 0.32
abort 0.08 0.07 0.29 0.02 0.00 0.00
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.03 0.00 0.12 0.00 0.00 0.00
POST 0.90 1.19 3.29 0.32 0.00 0.05
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.93 1.19 3.41 0.32 0.00 0.05
all replies 100.00 100.00 366.92 27.28 0.44 4.00

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"image" n/a n/a n/a 0.32 4.87 53.06
"HTML" n/a n/a n/a 0.33 8.14 99.44
"download" n/a n/a n/a 31.16 250.51 2613.53
"other" n/a n/a n/a 5.37 25.39 110.20
all content types n/a n/a n/a 0.32 10.23 2613.53
hits n/a n/a n/a n/a n/a n/a
misses 0.00 2529.52 17988.00 0.32 10.23 2613.53
hits and misses 0.00 2529.52 17988.00 0.32 10.23 2613.53
ims/200 1.00 2455.67 5153.00 0.41 4.29 42.00
ims/304 0.00 2498.94 6110.00 0.10 0.12 0.13
all ims 0.00 2498.19 6110.00 0.10 0.20 42.00
cachable 0.00 2530.10 17988.00 0.38 10.21 2613.53
not cachable 0.00 2528.84 7952.00 0.32 10.26 672.63
cachable and not 0.00 2529.52 17988.00 0.32 10.23 2613.53
fill 0.00 2530.10 17988.00 0.38 10.21 2613.53
reload 0.00 2512.73 8752.00 0.32 7.09 1178.59
abort 0.00 2513.78 4617.00 0.38 8.74 41.05
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD 514.00 2521.73 5645.00 0.32 0.37 0.44
POST 79.00 2564.95 20007.00 0.36 12.59 425.21
PUT n/a n/a n/a n/a n/a n/a
all non-gets 79.00 2563.39 20007.00 0.32 12.15 425.21
all replies 0.00 2526.79 20007.00 0.10 9.52 2613.53

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' classe) or '304 Not Modified' (the 'ims/304' classe) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

No errors detected in the given scope.


9. Object '"image"'

contribution: 56.85% by count and 29.11% by volume
rates: 208.59xact/sec or 7.94Mbits/sec
totals: 0.25Mxact and 1.16GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.32KBytes min, 4.87KBytes mean, and 53.06KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


10. Object '"HTML"'

contribution: 10.78% by count and 9.22% by volume
rates: 39.55xact/sec or 2.52Mbits/sec
totals: 0.05Mxact and 0.37GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.33KBytes min, 8.14KBytes mean, and 99.44KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


11. Object '"download"'

contribution: 0.33% by count and 8.66% by volume
rates: 1.21xact/sec or 2.36Mbits/sec
totals: 0.00Mxact and 0.35GByte
response time: n/a min, n/a mean, and n/a max
response size: 31.16KBytes min, 250.51KBytes mean, and 2613.53KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


12. Object '"other"'

contribution: 16.38% by count and 43.69% by volume
rates: 60.10xact/sec or 11.92Mbits/sec
totals: 0.07Mxact and 1.75GByte
response time: n/a min, n/a mean, and n/a max
response size: 5.37KBytes min, 25.39KBytes mean, and 110.20KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


13. Object 'all content types'

contribution: 84.34% by count and 90.68% by volume
rates: 309.45xact/sec or 24.74Mbits/sec
totals: 0.37Mxact and 3.62GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.32KBytes min, 10.23KBytes mean, and 2613.53KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




14. Object 'hits'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'hits and misses' class.




15. Object 'misses'

contribution: 84.34% by count and 90.68% by volume
rates: 309.45xact/sec or 24.74Mbits/sec
totals: 0.37Mxact and 3.62GByte
response time: 0.00msec min, 2529.52msec mean, and 17988.00msec max
response size: 0.32KBytes min, 10.23KBytes mean, and 2613.53KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=server__phases=dec2
object size distribution
object.misses.size.fig.scope=sides=server__phases=dec2
response time trace
object.misses.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




16. Object 'hits and misses'

contribution: 84.34% by count and 90.68% by volume
rates: 309.45xact/sec or 24.74Mbits/sec
totals: 0.37Mxact and 3.62GByte
response time: 0.00msec min, 2529.52msec mean, and 17988.00msec max
response size: 0.32KBytes min, 10.23KBytes mean, and 2613.53KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=server__phases=dec2
object size distribution
object.hits_and_misses.size.fig.scope=sides=server__phases=dec2
response time trace
object.hits_and_misses.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'all replies' class.




17. Object 'ims/200'

contribution: 0.07% by count and 0.03% by volume
rates: 0.25xact/sec or 0.01Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 1.00msec min, 2455.67msec mean, and 5153.00msec max
response size: 0.41KBytes min, 4.29KBytes mean, and 42.00KBytes max
response time distribution
object.ims_sc200.rptm.fig.scope=sides=server__phases=dec2
object size distribution
object.ims_sc200.size.fig.scope=sides=server__phases=dec2

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




18. Object 'ims/304'

contribution: 3.87% by count and 0.05% by volume
rates: 14.19xact/sec or 0.01Mbits/sec
totals: 0.02Mxact and 0.00GByte
response time: 0.00msec min, 2498.94msec mean, and 6110.00msec max
response size: 0.10KBytes min, 0.12KBytes mean, and 0.13KBytes max
response time distribution
object.ims_sc304.rptm.fig.scope=sides=server__phases=dec2
object size distribution
object.ims_sc304.size.fig.scope=sides=server__phases=dec2

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




19. Object 'all ims'

contribution: 3.94% by count and 0.08% by volume
rates: 14.44xact/sec or 0.02Mbits/sec
totals: 0.02Mxact and 0.00GByte
response time: 0.00msec min, 2498.19msec mean, and 6110.00msec max
response size: 0.10KBytes min, 0.20KBytes mean, and 42.00KBytes max
response time distribution
object.ims_scAll.rptm.fig.scope=sides=server__phases=dec2
object size distribution
object.ims_scAll.size.fig.scope=sides=server__phases=dec2
response time trace
object.ims_scAll.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'all replies' class.




20. Object 'cachable'

contribution: 45.81% by count and 49.16% by volume
rates: 168.09xact/sec or 13.41Mbits/sec
totals: 0.20Mxact and 1.96GByte
response time: 0.00msec min, 2530.10msec mean, and 17988.00msec max
response size: 0.38KBytes min, 10.21KBytes mean, and 2613.53KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




21. Object 'not cachable'

contribution: 38.52% by count and 41.52% by volume
rates: 141.35xact/sec or 11.33Mbits/sec
totals: 0.17Mxact and 1.66GByte
response time: 0.00msec min, 2528.84msec mean, and 7952.00msec max
response size: 0.32KBytes min, 10.26KBytes mean, and 672.63KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




22. Object 'cachable and not'

contribution: 84.34% by count and 90.68% by volume
rates: 309.45xact/sec or 24.74Mbits/sec
totals: 0.37Mxact and 3.62GByte
response time: 0.00msec min, 2529.52msec mean, and 17988.00msec max
response size: 0.32KBytes min, 10.23KBytes mean, and 2613.53KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'all replies' class.




23. Object 'fill'

contribution: 45.81% by count and 49.16% by volume
rates: 168.09xact/sec or 13.41Mbits/sec
totals: 0.20Mxact and 1.96GByte
response time: 0.00msec min, 2530.10msec mean, and 17988.00msec max
response size: 0.38KBytes min, 10.21KBytes mean, and 2613.53KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'all replies' class.




24. Object 'reload'

contribution: 10.80% by count and 8.05% by volume
rates: 39.62xact/sec or 2.20Mbits/sec
totals: 0.05Mxact and 0.32GByte
response time: 0.00msec min, 2512.73msec mean, and 8752.00msec max
response size: 0.32KBytes min, 7.09KBytes mean, and 1178.59KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=server__phases=dec2
object size distribution
object.reload.size.fig.scope=sides=server__phases=dec2
response time trace
object.reload.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'abort'

contribution: 0.08% by count and 0.07% by volume
rates: 0.29xact/sec or 0.02Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 0.00msec min, 2513.78msec mean, and 4617.00msec max
response size: 0.38KBytes min, 8.74KBytes mean, and 41.05KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.abort.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'HEAD'

contribution: 0.03% by count and 0.00% by volume
rates: 0.12xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 514.00msec min, 2521.73msec mean, and 5645.00msec max
response size: 0.32KBytes min, 0.37KBytes mean, and 0.44KBytes max
response time distribution
object.method_head.rptm.fig.scope=sides=server__phases=dec2
object size distribution
object.method_head.size.fig.scope=sides=server__phases=dec2
response time trace
object.method_head.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




29. Object 'POST'

contribution: 0.90% by count and 1.19% by volume
rates: 3.29xact/sec or 0.32Mbits/sec
totals: 0.00Mxact and 0.05GByte
response time: 79.00msec min, 2564.95msec mean, and 20007.00msec max
response size: 0.36KBytes min, 12.59KBytes mean, and 425.21KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=server__phases=dec2
object size distribution
object.method_post.size.fig.scope=sides=server__phases=dec2
response time trace
object.method_post.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




30. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'all non-gets'

contribution: 0.93% by count and 1.19% by volume
rates: 3.41xact/sec or 0.32Mbits/sec
totals: 0.00Mxact and 0.05GByte
response time: 79.00msec min, 2563.39msec mean, and 20007.00msec max
response size: 0.32KBytes min, 12.15KBytes mean, and 425.21KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=server__phases=dec2
object size distribution
object.method_all.size.fig.scope=sides=server__phases=dec2
response time trace
object.method_all.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.

This object class belongs to the 'all replies' class.




32. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 366.92xact/sec or 27.28Mbits/sec
totals: 0.44Mxact and 4.00GByte
response time: 0.00msec min, 2526.79msec mean, and 20007.00msec max
response size: 0.10KBytes min, 9.52KBytes mean, and 2613.53KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=server__phases=dec2
object size distribution
object.rep.size.fig.scope=sides=server__phases=dec2
response time trace
object.rep.rptm.trace.scope=sides=server__phases=dec2

No description is available for this object class.