Aratech C3100, polymix4: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)		 Volume
(Mbits/sec)
offered 762.08 61.36
measured 762.08 61.30
Load trace
load.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

The load table shows offered and measured load from server side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)		 BHR
(%)
offered 0.00 0.00
measured 0.00 0.00

The server-side hit ratios should always be zero. If a request reaches a server, it is, by definition, a miss.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 68660802.00 68660802.00 20.75
waiting 0.00 0.00 0.00
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 17487141.00 17487105.00 3860.93
established 17487141.00 17487105.00 3860.38
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
876.00 0.00 0.00
population level trace
populus.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)		 Volume
(%)		 Count
(xact/sec)		 Volume
(Mbits/sec)		 Count
(xact,M)		 Volume
(Gbyte)
"image" 62.21 29.47 473.65 18.07 42.67 198.71
"HTML" 13.68 11.47 104.16 7.03 9.38 77.31
"download" 0.43 11.38 3.28 6.98 0.30 76.75
"other" 18.00 44.30 137.01 27.16 12.34 298.70
all content types 94.32 96.63 718.10 59.24 64.70 651.48
hits 0.00 0.00 0.00 0.00 0.00 0.00
misses 94.32 96.63 718.10 59.24 64.70 651.48
hits and misses 94.32 96.63 718.10 59.24 64.70 651.48
ims/200 0.02 0.01 0.17 0.01 0.02 0.06
ims/304 1.29 0.02 9.80 0.01 0.88 0.10
all ims 1.31 0.02 9.97 0.01 0.90 0.16
cachable 67.60 69.25 514.65 42.45 46.37 466.92
not cachable 26.72 27.37 203.45 16.78 18.33 184.55
cachable and not 94.32 96.63 718.10 59.24 64.70 651.48
fill 67.60 69.25 514.65 42.45 46.37 466.92
reload 4.04 2.91 30.76 1.78 2.77 19.63
abort 0.09 0.10 0.72 0.06 0.06 0.65
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.01 0.00 0.09 0.00 0.01 0.00
POST 0.32 0.44 2.44 0.27 0.22 2.96
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.33 0.44 2.53 0.27 0.23 2.96
all replies 100.00 100.00 761.36 61.30 68.60 674.23

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"image" n/a n/a n/a 0.30 4.88 66.00
"HTML" n/a n/a n/a 0.31 8.64 99.44
"download" n/a n/a n/a 21.85 272.12 2613.53
"other" n/a n/a n/a 5.34 25.37 110.21
all content types n/a n/a n/a 0.30 10.56 2613.53
hits n/a n/a n/a n/a n/a n/a
misses 0.00 2530.70 19700.00 0.30 10.56 2613.53
hits and misses 0.00 2530.70 19700.00 0.30 10.56 2613.53
ims/200 0.00 2501.02 6226.00 0.38 4.10 102.20
ims/304 0.00 2503.94 6991.00 0.10 0.12 0.13
all ims 0.00 2503.89 6991.00 0.10 0.19 102.20
cachable 0.00 2530.69 19700.00 0.33 10.56 2613.53
not cachable 0.00 2530.72 12097.00 0.30 10.56 1176.96
cachable and not 0.00 2530.70 19700.00 0.30 10.56 2613.53
fill 0.00 2530.69 19700.00 0.33 10.56 2613.53
reload 0.00 2517.84 20379.00 0.32 7.43 2613.53
abort 0.00 2514.71 7180.00 0.32 10.49 2613.53
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD 0.00 2504.87 6074.00 0.32 0.38 0.44
POST 78.00 2574.69 20050.00 0.33 14.08 2613.53
PUT n/a n/a n/a n/a n/a n/a
all non-gets 0.00 2572.32 20050.00 0.32 13.61 2613.53
all replies 0.00 2529.97 20379.00 0.10 10.31 2613.53

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' classe) or '304 Not Modified' (the 'ims/304' classe) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

No errors detected in the given scope.


9. Object '"image"'

contribution: 62.21% by count and 29.47% by volume
rates: 473.65xact/sec or 18.07Mbits/sec
totals: 42.67Mxact and 198.71GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.30KBytes min, 4.88KBytes mean, and 66.00KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


10. Object '"HTML"'

contribution: 13.68% by count and 11.47% by volume
rates: 104.16xact/sec or 7.03Mbits/sec
totals: 9.38Mxact and 77.31GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.31KBytes min, 8.64KBytes mean, and 99.44KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


11. Object '"download"'

contribution: 0.43% by count and 11.38% by volume
rates: 3.28xact/sec or 6.98Mbits/sec
totals: 0.30Mxact and 76.75GByte
response time: n/a min, n/a mean, and n/a max
response size: 21.85KBytes min, 272.12KBytes mean, and 2613.53KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


12. Object '"other"'

contribution: 18.00% by count and 44.30% by volume
rates: 137.01xact/sec or 27.16Mbits/sec
totals: 12.34Mxact and 298.70GByte
response time: n/a min, n/a mean, and n/a max
response size: 5.34KBytes min, 25.37KBytes mean, and 110.21KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


13. Object 'all content types'

contribution: 94.32% by count and 96.63% by volume
rates: 718.10xact/sec or 59.24Mbits/sec
totals: 64.70Mxact and 651.48GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.30KBytes min, 10.56KBytes mean, and 2613.53KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




14. Object 'hits'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'hits and misses' class.




15. Object 'misses'

contribution: 94.32% by count and 96.63% by volume
rates: 718.10xact/sec or 59.24Mbits/sec
totals: 64.70Mxact and 651.48GByte
response time: 0.00msec min, 2530.70msec mean, and 19700.00msec max
response size: 0.30KBytes min, 10.56KBytes mean, and 2613.53KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.misses.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.misses.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




16. Object 'hits and misses'

contribution: 94.32% by count and 96.63% by volume
rates: 718.10xact/sec or 59.24Mbits/sec
totals: 64.70Mxact and 651.48GByte
response time: 0.00msec min, 2530.70msec mean, and 19700.00msec max
response size: 0.30KBytes min, 10.56KBytes mean, and 2613.53KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.hits_and_misses.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.hits_and_misses.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




17. Object 'ims/200'

contribution: 0.02% by count and 0.01% by volume
rates: 0.17xact/sec or 0.01Mbits/sec
totals: 0.02Mxact and 0.06GByte
response time: 0.00msec min, 2501.02msec mean, and 6226.00msec max
response size: 0.38KBytes min, 4.10KBytes mean, and 102.20KBytes max
response time distribution
object.ims_sc200.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_sc200.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




18. Object 'ims/304'

contribution: 1.29% by count and 0.02% by volume
rates: 9.80xact/sec or 0.01Mbits/sec
totals: 0.88Mxact and 0.10GByte
response time: 0.00msec min, 2503.94msec mean, and 6991.00msec max
response size: 0.10KBytes min, 0.12KBytes mean, and 0.13KBytes max
response time distribution
object.ims_sc304.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_sc304.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




19. Object 'all ims'

contribution: 1.31% by count and 0.02% by volume
rates: 9.97xact/sec or 0.01Mbits/sec
totals: 0.90Mxact and 0.16GByte
response time: 0.00msec min, 2503.89msec mean, and 6991.00msec max
response size: 0.10KBytes min, 0.19KBytes mean, and 102.20KBytes max
response time distribution
object.ims_scAll.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_scAll.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.ims_scAll.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




20. Object 'cachable'

contribution: 67.60% by count and 69.25% by volume
rates: 514.65xact/sec or 42.45Mbits/sec
totals: 46.37Mxact and 466.92GByte
response time: 0.00msec min, 2530.69msec mean, and 19700.00msec max
response size: 0.33KBytes min, 10.56KBytes mean, and 2613.53KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




21. Object 'not cachable'

contribution: 26.72% by count and 27.37% by volume
rates: 203.45xact/sec or 16.78Mbits/sec
totals: 18.33Mxact and 184.55GByte
response time: 0.00msec min, 2530.72msec mean, and 12097.00msec max
response size: 0.30KBytes min, 10.56KBytes mean, and 1176.96KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




22. Object 'cachable and not'

contribution: 94.32% by count and 96.63% by volume
rates: 718.10xact/sec or 59.24Mbits/sec
totals: 64.70Mxact and 651.48GByte
response time: 0.00msec min, 2530.70msec mean, and 19700.00msec max
response size: 0.30KBytes min, 10.56KBytes mean, and 2613.53KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




23. Object 'fill'

contribution: 67.60% by count and 69.25% by volume
rates: 514.65xact/sec or 42.45Mbits/sec
totals: 46.37Mxact and 466.92GByte
response time: 0.00msec min, 2530.69msec mean, and 19700.00msec max
response size: 0.33KBytes min, 10.56KBytes mean, and 2613.53KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




24. Object 'reload'

contribution: 4.04% by count and 2.91% by volume
rates: 30.76xact/sec or 1.78Mbits/sec
totals: 2.77Mxact and 19.63GByte
response time: 0.00msec min, 2517.84msec mean, and 20379.00msec max
response size: 0.32KBytes min, 7.43KBytes mean, and 2613.53KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.reload.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.reload.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'abort'

contribution: 0.09% by count and 0.10% by volume
rates: 0.72xact/sec or 0.06Mbits/sec
totals: 0.06Mxact and 0.65GByte
response time: 0.00msec min, 2514.71msec mean, and 7180.00msec max
response size: 0.32KBytes min, 10.49KBytes mean, and 2613.53KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.abort.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'HEAD'

contribution: 0.01% by count and 0.00% by volume
rates: 0.09xact/sec or 0.00Mbits/sec
totals: 0.01Mxact and 0.00GByte
response time: 0.00msec min, 2504.87msec mean, and 6074.00msec max
response size: 0.32KBytes min, 0.38KBytes mean, and 0.44KBytes max
response time distribution
object.method_head.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_head.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_head.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




29. Object 'POST'

contribution: 0.32% by count and 0.44% by volume
rates: 2.44xact/sec or 0.27Mbits/sec
totals: 0.22Mxact and 2.96GByte
response time: 78.00msec min, 2574.69msec mean, and 20050.00msec max
response size: 0.33KBytes min, 14.08KBytes mean, and 2613.53KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_post.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_post.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




30. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'all non-gets'

contribution: 0.33% by count and 0.44% by volume
rates: 2.53xact/sec or 0.27Mbits/sec
totals: 0.23Mxact and 2.96GByte
response time: 0.00msec min, 2572.32msec mean, and 20050.00msec max
response size: 0.32KBytes min, 13.61KBytes mean, and 2613.53KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_all.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_all.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




32. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 761.36xact/sec or 61.30Mbits/sec
totals: 68.60Mxact and 674.23GByte
response time: 0.00msec min, 2529.97msec mean, and 20379.00msec max
response size: 0.10KBytes min, 10.31KBytes mean, and 2613.53KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.rep.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.rep.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.