TNCLABS, polymix4: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)		 Volume
(Mbits/sec)
offered 1249.65 67.33
measured 1249.66 67.30
Load trace
load.trace.scope=sides=client__phases=top2

The load table shows offered and measured load from client side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)		 BHR
(%)
offered 60.74 43.63
measured 56.70 39.86

The hit ratios table shows offered and measured hit ratios from client side point of view. Polygraph counts every repeated request to a cachable object as an offered hit. Measured (cache) hits are detected using Polygraph-specific headers. All hits are counted for 'basic' transactions only (simple HTTP GET requests with '200 OK' responses).

DHR, Document Hit Ratio, is the ratio of the total number of hits to the number of all basic transactions (hits and misses). BHR, Byte Hit Ratio, is the ratio of the total volume (a sum of response sizes) of hits to the total volume of all basic transactions.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 17998068.00 17998202.00 1608.22
waiting 7033097.00 7033146.00 469.40
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=client__phases=top2

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 1219334.00 1219260.00 11571.05
established 1219334.00 1219260.00 11570.66
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=client__phases=top2

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
0.00 0.00 3126.00
population level trace
populus.level.trace.scope=sides=client__phases=top2

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)		 Volume
(%)		 Count
(xact/sec)		 Volume
(Mbits/sec)		 Count
(xact,M)		 Volume
(Gbyte)
"image" 62.77 44.82 784.16 30.16 11.29 53.03
"HTML" 15.39 10.50 192.26 7.07 2.77 12.43
"download" 0.13 5.24 1.62 3.53 0.02 6.20
"other" 7.64 27.68 95.39 18.63 1.37 32.75
all content types 85.93 88.23 1073.43 59.38 15.46 104.40
hits 48.72 35.17 608.64 23.67 8.77 41.62
misses 37.21 53.06 464.79 35.71 6.69 62.78
hits and misses 85.93 88.23 1073.43 59.38 15.46 104.40
ims/200 5.39 5.55 67.37 3.74 0.97 6.57
ims/304 2.94 0.06 36.67 0.04 0.53 0.07
all ims 8.33 5.61 104.04 3.78 1.50 6.64
cachable 68.83 64.32 859.84 43.29 12.38 76.10
not cachable 17.10 23.92 213.59 16.10 3.08 28.30
cachable and not 85.93 88.23 1073.43 59.38 15.46 104.40
fill 20.11 29.14 251.20 19.61 3.62 34.49
reload 5.36 5.49 67.01 3.70 0.97 6.50
abort 0.04 0.03 0.46 0.02 0.01 0.03
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.02 0.00 0.29 0.00 0.00 0.00
POST 0.35 0.66 4.43 0.44 0.06 0.78
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.38 0.66 4.71 0.44 0.07 0.78
all replies 100.00 100.00 1249.19 67.30 17.99 118.33

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"image" n/a n/a n/a 0.34 4.92 58.58
"HTML" n/a n/a n/a 0.36 4.71 69.77
"download" n/a n/a n/a 17.77 278.04 1987.72
"other" n/a n/a n/a 6.80 25.00 94.83
all content types n/a n/a n/a 0.34 7.08 1987.72
hits 3.00 16.62 2780.00 0.41 4.98 1892.68
misses 83.00 2651.84 21372.00 0.34 9.83 1987.72
hits and misses 3.00 1157.67 21372.00 0.34 7.08 1987.72
ims/200 3.00 1165.17 20409.00 0.35 7.10 1987.72
ims/304 0.00 2625.94 10068.00 0.09 0.14 0.16
all ims 0.00 1680.07 20409.00 0.09 4.65 1987.72
cachable 3.00 786.58 20617.00 0.41 6.44 1892.68
not cachable 83.00 2651.51 21372.00 0.34 9.65 1987.72
cachable and not 3.00 1157.67 21372.00 0.34 7.08 1987.72
fill 83.00 2652.11 20617.00 0.41 9.99 1892.68
reload 0.00 2637.42 19207.00 0.35 7.06 1987.72
abort 88.00 2645.03 6399.00 0.36 5.00 330.93
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD 3.00 1340.32 5676.00 0.34 0.42 0.47
POST 0.00 2666.46 15023.00 0.41 12.79 1892.68
PUT n/a n/a n/a n/a n/a n/a
all non-gets 0.00 2586.31 15023.00 0.34 12.05 1892.68
all replies 0.00 1285.95 21372.00 0.09 6.90 1987.72

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' classe) or '304 Not Modified' (the 'ims/304' classe) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

No errors detected in the given scope.


9. Object '"image"'

contribution: 62.77% by count and 44.82% by volume
rates: 784.16xact/sec or 30.16Mbits/sec
totals: 11.29Mxact and 53.03GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.34KBytes min, 4.92KBytes mean, and 58.58KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


10. Object '"HTML"'

contribution: 15.39% by count and 10.50% by volume
rates: 192.26xact/sec or 7.07Mbits/sec
totals: 2.77Mxact and 12.43GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.36KBytes min, 4.71KBytes mean, and 69.77KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


11. Object '"download"'

contribution: 0.13% by count and 5.24% by volume
rates: 1.62xact/sec or 3.53Mbits/sec
totals: 0.02Mxact and 6.20GByte
response time: n/a min, n/a mean, and n/a max
response size: 17.77KBytes min, 278.04KBytes mean, and 1987.72KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


12. Object '"other"'

contribution: 7.64% by count and 27.68% by volume
rates: 95.39xact/sec or 18.63Mbits/sec
totals: 1.37Mxact and 32.75GByte
response time: n/a min, n/a mean, and n/a max
response size: 6.80KBytes min, 25.00KBytes mean, and 94.83KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


13. Object 'all content types'

contribution: 85.93% by count and 88.23% by volume
rates: 1073.43xact/sec or 59.38Mbits/sec
totals: 15.46Mxact and 104.40GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.34KBytes min, 7.08KBytes mean, and 1987.72KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




14. Object 'hits'

contribution: 48.72% by count and 35.17% by volume
rates: 608.64xact/sec or 23.67Mbits/sec
totals: 8.77Mxact and 41.62GByte
response time: 3.00msec min, 16.62msec mean, and 2780.00msec max
response size: 0.41KBytes min, 4.98KBytes mean, and 1892.68KBytes max
response time distribution
object.hits.rptm.fig.scope=sides=client__phases=top2
object size distribution
object.hits.size.fig.scope=sides=client__phases=top2
response time trace
object.hits.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




15. Object 'misses'

contribution: 37.21% by count and 53.06% by volume
rates: 464.79xact/sec or 35.71Mbits/sec
totals: 6.69Mxact and 62.78GByte
response time: 83.00msec min, 2651.84msec mean, and 21372.00msec max
response size: 0.34KBytes min, 9.83KBytes mean, and 1987.72KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=client__phases=top2
object size distribution
object.misses.size.fig.scope=sides=client__phases=top2
response time trace
object.misses.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




16. Object 'hits and misses'

contribution: 85.93% by count and 88.23% by volume
rates: 1073.43xact/sec or 59.38Mbits/sec
totals: 15.46Mxact and 104.40GByte
response time: 3.00msec min, 1157.67msec mean, and 21372.00msec max
response size: 0.34KBytes min, 7.08KBytes mean, and 1987.72KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=client__phases=top2
object size distribution
object.hits_and_misses.size.fig.scope=sides=client__phases=top2
response time trace
object.hits_and_misses.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




17. Object 'ims/200'

contribution: 5.39% by count and 5.55% by volume
rates: 67.37xact/sec or 3.74Mbits/sec
totals: 0.97Mxact and 6.57GByte
response time: 3.00msec min, 1165.17msec mean, and 20409.00msec max
response size: 0.35KBytes min, 7.10KBytes mean, and 1987.72KBytes max
response time distribution
object.ims_sc200.rptm.fig.scope=sides=client__phases=top2
object size distribution
object.ims_sc200.size.fig.scope=sides=client__phases=top2

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




18. Object 'ims/304'

contribution: 2.94% by count and 0.06% by volume
rates: 36.67xact/sec or 0.04Mbits/sec
totals: 0.53Mxact and 0.07GByte
response time: 0.00msec min, 2625.94msec mean, and 10068.00msec max
response size: 0.09KBytes min, 0.14KBytes mean, and 0.16KBytes max
response time distribution
object.ims_sc304.rptm.fig.scope=sides=client__phases=top2
object size distribution
object.ims_sc304.size.fig.scope=sides=client__phases=top2

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




19. Object 'all ims'

contribution: 8.33% by count and 5.61% by volume
rates: 104.04xact/sec or 3.78Mbits/sec
totals: 1.50Mxact and 6.64GByte
response time: 0.00msec min, 1680.07msec mean, and 20409.00msec max
response size: 0.09KBytes min, 4.65KBytes mean, and 1987.72KBytes max
response time distribution
object.ims_scAll.rptm.fig.scope=sides=client__phases=top2
object size distribution
object.ims_scAll.size.fig.scope=sides=client__phases=top2
response time trace
object.ims_scAll.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




20. Object 'cachable'

contribution: 68.83% by count and 64.32% by volume
rates: 859.84xact/sec or 43.29Mbits/sec
totals: 12.38Mxact and 76.10GByte
response time: 3.00msec min, 786.58msec mean, and 20617.00msec max
response size: 0.41KBytes min, 6.44KBytes mean, and 1892.68KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




21. Object 'not cachable'

contribution: 17.10% by count and 23.92% by volume
rates: 213.59xact/sec or 16.10Mbits/sec
totals: 3.08Mxact and 28.30GByte
response time: 83.00msec min, 2651.51msec mean, and 21372.00msec max
response size: 0.34KBytes min, 9.65KBytes mean, and 1987.72KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




22. Object 'cachable and not'

contribution: 85.93% by count and 88.23% by volume
rates: 1073.43xact/sec or 59.38Mbits/sec
totals: 15.46Mxact and 104.40GByte
response time: 3.00msec min, 1157.67msec mean, and 21372.00msec max
response size: 0.34KBytes min, 7.08KBytes mean, and 1987.72KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




23. Object 'fill'

contribution: 20.11% by count and 29.14% by volume
rates: 251.20xact/sec or 19.61Mbits/sec
totals: 3.62Mxact and 34.49GByte
response time: 83.00msec min, 2652.11msec mean, and 20617.00msec max
response size: 0.41KBytes min, 9.99KBytes mean, and 1892.68KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




24. Object 'reload'

contribution: 5.36% by count and 5.49% by volume
rates: 67.01xact/sec or 3.70Mbits/sec
totals: 0.97Mxact and 6.50GByte
response time: 0.00msec min, 2637.42msec mean, and 19207.00msec max
response size: 0.35KBytes min, 7.06KBytes mean, and 1987.72KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=client__phases=top2
object size distribution
object.reload.size.fig.scope=sides=client__phases=top2
response time trace
object.reload.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'abort'

contribution: 0.04% by count and 0.03% by volume
rates: 0.46xact/sec or 0.02Mbits/sec
totals: 0.01Mxact and 0.03GByte
response time: 88.00msec min, 2645.03msec mean, and 6399.00msec max
response size: 0.36KBytes min, 5.00KBytes mean, and 330.93KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.abort.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'HEAD'

contribution: 0.02% by count and 0.00% by volume
rates: 0.29xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 3.00msec min, 1340.32msec mean, and 5676.00msec max
response size: 0.34KBytes min, 0.42KBytes mean, and 0.47KBytes max
response time distribution
object.method_head.rptm.fig.scope=sides=client__phases=top2
object size distribution
object.method_head.size.fig.scope=sides=client__phases=top2
response time trace
object.method_head.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




29. Object 'POST'

contribution: 0.35% by count and 0.66% by volume
rates: 4.43xact/sec or 0.44Mbits/sec
totals: 0.06Mxact and 0.78GByte
response time: 0.00msec min, 2666.46msec mean, and 15023.00msec max
response size: 0.41KBytes min, 12.79KBytes mean, and 1892.68KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=client__phases=top2
object size distribution
object.method_post.size.fig.scope=sides=client__phases=top2
response time trace
object.method_post.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




30. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'all non-gets'

contribution: 0.38% by count and 0.66% by volume
rates: 4.71xact/sec or 0.44Mbits/sec
totals: 0.07Mxact and 0.78GByte
response time: 0.00msec min, 2586.31msec mean, and 15023.00msec max
response size: 0.34KBytes min, 12.05KBytes mean, and 1892.68KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=client__phases=top2
object size distribution
object.method_all.size.fig.scope=sides=client__phases=top2
response time trace
object.method_all.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




32. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 1249.19xact/sec or 67.30Mbits/sec
totals: 17.99Mxact and 118.33GByte
response time: 0.00msec min, 1285.95msec mean, and 21372.00msec max
response size: 0.09KBytes min, 6.90KBytes mean, and 1987.72KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=client__phases=top2
object size distribution
object.rep.size.fig.scope=sides=client__phases=top2
response time trace
object.rep.rptm.trace.scope=sides=client__phases=top2

No description is available for this object class.