TNCLABS, polymix4: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)		 Volume
(Mbits/sec)
offered 496.51 38.10
measured 496.51 38.06
Load trace
load.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

The load table shows offered and measured load from server side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)		 BHR
(%)
offered 0.00 0.00
measured 0.00 0.00

The server-side hit ratios should always be zero. If a request reaches a server, it is, by definition, a miss.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 38435066.00 38435066.00 13.31
waiting 0.00 0.00 0.00
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 10835645.00 10835632.00 2784.37
established 10835645.00 10835632.00 2784.18
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
813.00 0.00 0.00
population level trace
populus.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)		 Volume
(%)		 Count
(xact/sec)		 Volume
(Mbits/sec)		 Count
(xact,M)		 Volume
(Gbyte)
"image" 58.89 29.23 292.15 11.13 22.62 105.14
"HTML" 12.30 10.35 61.03 3.94 4.72 37.21
"download" 0.37 10.75 1.84 4.09 0.14 38.65
"other" 16.24 42.10 80.55 16.02 6.24 151.43
all content types 87.80 92.43 435.57 35.18 33.72 332.43
hits 0.00 0.00 0.00 0.00 0.00 0.00
misses 87.80 92.43 435.57 35.18 33.72 332.43
hits and misses 87.80 92.43 435.57 35.18 33.72 332.43
ims/200 2.81 2.76 13.93 1.05 1.08 9.94
ims/304 3.19 0.04 15.82 0.01 1.22 0.13
all ims 6.00 2.80 29.75 1.07 2.30 10.07
cachable 59.72 63.44 296.26 24.15 22.93 228.17
not cachable 28.08 28.99 139.31 11.03 10.78 104.27
cachable and not 87.80 92.43 435.57 35.18 33.72 332.43
fill 59.72 63.44 296.26 24.15 22.93 228.17
reload 5.80 4.25 28.79 1.62 2.23 15.30
abort 0.09 0.09 0.43 0.04 0.03 0.33
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.01 0.00 0.06 0.00 0.01 0.00
POST 0.38 0.52 1.90 0.20 0.15 1.86
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.40 0.52 1.97 0.20 0.15 1.86
all replies 100.00 100.00 496.07 38.06 38.40 359.67

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"image" n/a n/a n/a 0.31 4.88 66.00
"HTML" n/a n/a n/a 0.31 8.26 69.73
"download" n/a n/a n/a 17.73 285.08 1987.70
"other" n/a n/a n/a 6.78 25.46 94.80
all content types n/a n/a n/a 0.31 10.34 1987.70
hits n/a n/a n/a n/a n/a n/a
misses 0.00 2531.13 21279.00 0.31 10.34 1987.70
hits and misses 0.00 2531.13 21279.00 0.31 10.34 1987.70
ims/200 0.00 2528.19 20243.00 0.32 9.67 1987.70
ims/304 0.00 2503.52 6915.00 0.06 0.11 0.13
all ims 0.00 2515.08 20243.00 0.06 4.59 1987.70
cachable 0.00 2531.92 20435.00 0.35 10.43 1892.65
not cachable 0.00 2529.47 21279.00 0.31 10.14 1987.70
cachable and not 0.00 2531.13 21279.00 0.31 10.34 1987.70
fill 0.00 2531.92 20435.00 0.35 10.43 1892.65
reload 0.00 2517.83 19093.00 0.32 7.20 1987.70
abort 0.00 2513.82 10409.00 0.32 10.34 1446.89
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD 0.00 2521.54 5583.00 0.32 0.38 0.44
POST 0.00 2549.49 14934.00 0.34 13.24 1892.65
PUT n/a n/a n/a n/a n/a n/a
all non-gets 0.00 2548.57 14934.00 0.32 12.82 1892.65
all replies 0.00 2529.47 21279.00 0.06 9.82 1987.70

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' classe) or '304 Not Modified' (the 'ims/304' classe) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

No errors detected in the given scope.


9. Object '"image"'

contribution: 58.89% by count and 29.23% by volume
rates: 292.15xact/sec or 11.13Mbits/sec
totals: 22.62Mxact and 105.14GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.31KBytes min, 4.88KBytes mean, and 66.00KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


10. Object '"HTML"'

contribution: 12.30% by count and 10.35% by volume
rates: 61.03xact/sec or 3.94Mbits/sec
totals: 4.72Mxact and 37.21GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.31KBytes min, 8.26KBytes mean, and 69.73KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


11. Object '"download"'

contribution: 0.37% by count and 10.75% by volume
rates: 1.84xact/sec or 4.09Mbits/sec
totals: 0.14Mxact and 38.65GByte
response time: n/a min, n/a mean, and n/a max
response size: 17.73KBytes min, 285.08KBytes mean, and 1987.70KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


12. Object '"other"'

contribution: 16.24% by count and 42.10% by volume
rates: 80.55xact/sec or 16.02Mbits/sec
totals: 6.24Mxact and 151.43GByte
response time: n/a min, n/a mean, and n/a max
response size: 6.78KBytes min, 25.46KBytes mean, and 94.80KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


13. Object 'all content types'

contribution: 87.80% by count and 92.43% by volume
rates: 435.57xact/sec or 35.18Mbits/sec
totals: 33.72Mxact and 332.43GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.31KBytes min, 10.34KBytes mean, and 1987.70KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




14. Object 'hits'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'hits and misses' class.




15. Object 'misses'

contribution: 87.80% by count and 92.43% by volume
rates: 435.57xact/sec or 35.18Mbits/sec
totals: 33.72Mxact and 332.43GByte
response time: 0.00msec min, 2531.13msec mean, and 21279.00msec max
response size: 0.31KBytes min, 10.34KBytes mean, and 1987.70KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.misses.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.misses.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




16. Object 'hits and misses'

contribution: 87.80% by count and 92.43% by volume
rates: 435.57xact/sec or 35.18Mbits/sec
totals: 33.72Mxact and 332.43GByte
response time: 0.00msec min, 2531.13msec mean, and 21279.00msec max
response size: 0.31KBytes min, 10.34KBytes mean, and 1987.70KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.hits_and_misses.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.hits_and_misses.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




17. Object 'ims/200'

contribution: 2.81% by count and 2.76% by volume
rates: 13.93xact/sec or 1.05Mbits/sec
totals: 1.08Mxact and 9.94GByte
response time: 0.00msec min, 2528.19msec mean, and 20243.00msec max
response size: 0.32KBytes min, 9.67KBytes mean, and 1987.70KBytes max
response time distribution
object.ims_sc200.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_sc200.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




18. Object 'ims/304'

contribution: 3.19% by count and 0.04% by volume
rates: 15.82xact/sec or 0.01Mbits/sec
totals: 1.22Mxact and 0.13GByte
response time: 0.00msec min, 2503.52msec mean, and 6915.00msec max
response size: 0.06KBytes min, 0.11KBytes mean, and 0.13KBytes max
response time distribution
object.ims_sc304.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_sc304.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




19. Object 'all ims'

contribution: 6.00% by count and 2.80% by volume
rates: 29.75xact/sec or 1.07Mbits/sec
totals: 2.30Mxact and 10.07GByte
response time: 0.00msec min, 2515.08msec mean, and 20243.00msec max
response size: 0.06KBytes min, 4.59KBytes mean, and 1987.70KBytes max
response time distribution
object.ims_scAll.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_scAll.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.ims_scAll.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




20. Object 'cachable'

contribution: 59.72% by count and 63.44% by volume
rates: 296.26xact/sec or 24.15Mbits/sec
totals: 22.93Mxact and 228.17GByte
response time: 0.00msec min, 2531.92msec mean, and 20435.00msec max
response size: 0.35KBytes min, 10.43KBytes mean, and 1892.65KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




21. Object 'not cachable'

contribution: 28.08% by count and 28.99% by volume
rates: 139.31xact/sec or 11.03Mbits/sec
totals: 10.78Mxact and 104.27GByte
response time: 0.00msec min, 2529.47msec mean, and 21279.00msec max
response size: 0.31KBytes min, 10.14KBytes mean, and 1987.70KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




22. Object 'cachable and not'

contribution: 87.80% by count and 92.43% by volume
rates: 435.57xact/sec or 35.18Mbits/sec
totals: 33.72Mxact and 332.43GByte
response time: 0.00msec min, 2531.13msec mean, and 21279.00msec max
response size: 0.31KBytes min, 10.34KBytes mean, and 1987.70KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




23. Object 'fill'

contribution: 59.72% by count and 63.44% by volume
rates: 296.26xact/sec or 24.15Mbits/sec
totals: 22.93Mxact and 228.17GByte
response time: 0.00msec min, 2531.92msec mean, and 20435.00msec max
response size: 0.35KBytes min, 10.43KBytes mean, and 1892.65KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




24. Object 'reload'

contribution: 5.80% by count and 4.25% by volume
rates: 28.79xact/sec or 1.62Mbits/sec
totals: 2.23Mxact and 15.30GByte
response time: 0.00msec min, 2517.83msec mean, and 19093.00msec max
response size: 0.32KBytes min, 7.20KBytes mean, and 1987.70KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.reload.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.reload.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'abort'

contribution: 0.09% by count and 0.09% by volume
rates: 0.43xact/sec or 0.04Mbits/sec
totals: 0.03Mxact and 0.33GByte
response time: 0.00msec min, 2513.82msec mean, and 10409.00msec max
response size: 0.32KBytes min, 10.34KBytes mean, and 1446.89KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.abort.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'HEAD'

contribution: 0.01% by count and 0.00% by volume
rates: 0.06xact/sec or 0.00Mbits/sec
totals: 0.01Mxact and 0.00GByte
response time: 0.00msec min, 2521.54msec mean, and 5583.00msec max
response size: 0.32KBytes min, 0.38KBytes mean, and 0.44KBytes max
response time distribution
object.method_head.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_head.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_head.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




29. Object 'POST'

contribution: 0.38% by count and 0.52% by volume
rates: 1.90xact/sec or 0.20Mbits/sec
totals: 0.15Mxact and 1.86GByte
response time: 0.00msec min, 2549.49msec mean, and 14934.00msec max
response size: 0.34KBytes min, 13.24KBytes mean, and 1892.65KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_post.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_post.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




30. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'all non-gets'

contribution: 0.40% by count and 0.52% by volume
rates: 1.97xact/sec or 0.20Mbits/sec
totals: 0.15Mxact and 1.86GByte
response time: 0.00msec min, 2548.57msec mean, and 14934.00msec max
response size: 0.32KBytes min, 12.82KBytes mean, and 1892.65KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_all.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_all.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




32. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 496.07xact/sec or 38.06Mbits/sec
totals: 38.40Mxact and 359.67GByte
response time: 0.00msec min, 2529.47msec mean, and 21279.00msec max
response size: 0.06KBytes min, 9.82KBytes mean, and 1987.70KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.rep.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.rep.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.