Chamomile, polymix4: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)
Volume
(Mbits/sec)
offered 29.98 1.67
measured 29.97 1.67
Load trace
load.trace.scope=sides=client__phases=idle

The load table shows offered and measured load from client side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)
BHR
(%)
offered 59.99 43.51
measured 49.94 34.54

The hit ratios table shows offered and measured hit ratios from client side point of view. Polygraph counts every repeated request to a cachable object as an offered hit. Measured (cache) hits are detected using Polygraph-specific headers. All hits are counted for 'basic' transactions only (simple HTTP GET requests with '200 OK' responses).

DHR, Document Hit Ratio, is the ratio of the total number of hits to the number of all basic transactions (hits and misses). BHR, Byte Hit Ratio, is the ratio of the total volume (a sum of response sizes) of hits to the total volume of all basic transactions.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 35994.00 35985.00 44.88
waiting 13854.00 13868.00 13.80
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=client__phases=idle

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 35994.00 35985.00 44.88
established 35994.00 35985.00 44.85
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=client__phases=idle

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
0.00 0.00 75.00
population level trace
populus.level.trace.scope=sides=client__phases=idle

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)
Volume
(%)
Count
(xact/sec)
Volume
(Mbits/sec)
Count
(xact,M)
Volume
(Gbyte)
"image" 61.98 42.59 18.57 0.71 0.02 0.10
"HTML" 15.57 10.90 4.67 0.18 0.01 0.03
"download" 0.14 6.04 0.04 0.10 0.00 0.01
"other" 7.88 26.69 2.36 0.45 0.00 0.07
all content types 85.56 86.22 25.64 1.44 0.03 0.21
hits 42.73 29.78 12.81 0.50 0.02 0.07
misses 42.83 56.45 12.83 0.94 0.02 0.14
hits and misses 85.56 86.22 25.64 1.44 0.03 0.21
ims/200 5.85 7.71 1.75 0.13 0.00 0.02
ims/304 3.03 0.06 0.91 0.00 0.00 0.00
all ims 8.88 7.77 2.66 0.13 0.00 0.02
cachable 68.61 62.28 20.56 1.04 0.02 0.15
not cachable 16.95 23.94 5.08 0.40 0.01 0.06
cachable and not 85.56 86.22 25.64 1.44 0.03 0.21
fill 25.88 32.51 7.75 0.54 0.01 0.08
reload 5.18 5.36 1.55 0.09 0.00 0.01
abort 0.00 0.00 0.00 0.00 0.00 0.00
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.00 0.00 0.00 0.00 0.00 0.00
POST 0.38 0.65 0.11 0.01 0.00 0.00
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.38 0.65 0.11 0.01 0.00 0.00
all replies 100.00 100.00 29.97 1.67 0.04 0.24

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"image" n/a n/a n/a 0.32 4.90 47.85
"HTML" n/a n/a n/a 0.33 4.99 68.83
"download" n/a n/a n/a 76.29 309.99 656.39
"other" n/a n/a n/a 6.79 24.18 94.76
all content types n/a n/a n/a 0.32 7.19 656.39
hits 1.00 39.38 535.00 0.32 4.97 656.39
misses 171.00 2771.58 8627.00 0.33 9.40 656.39
hits and misses 1.00 1407.03 8627.00 0.32 7.19 656.39
ims/200 1.00 1694.63 7903.00 0.29 9.40 656.31
ims/304 1.00 1267.58 7481.00 0.13 0.13 0.13
all ims 1.00 1549.07 7903.00 0.13 6.24 656.31
cachable 1.00 1068.39 8627.00 0.32 6.48 656.39
not cachable 180.00 2777.34 6999.00 0.38 10.07 442.84
cachable and not 1.00 1407.03 8627.00 0.32 7.19 656.39
fill 171.00 2767.80 8627.00 0.33 8.96 656.39
reload 190.00 2774.38 8081.00 0.34 7.37 536.63
abort n/a n/a n/a n/a n/a n/a
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD 1179.00 1179.00 1179.00 0.38 0.38 0.38
POST 479.00 2977.19 5779.00 0.26 12.37 62.20
PUT n/a n/a n/a n/a n/a n/a
all non-gets 479.00 2963.96 5779.00 0.26 12.29 62.20
all replies 1.00 1496.36 8627.00 0.13 7.13 656.39

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' classe) or '304 Not Modified' (the 'ims/304' classe) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

The total of 1 errors detected. Out of those errors, 1xact or 0.00% of all transactions were classified as transaction errors.

Error Count Contribution (%)
(c19) unsupported HTTP status code 1 100.00

The 'Errors' table shows detected errors. For each error type, the number of errors and their contribution towards total error count are shown.




9. Object '"image"'

contribution: 61.98% by count and 42.59% by volume
rates: 18.57xact/sec or 0.71Mbits/sec
totals: 0.02Mxact and 0.10GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.32KBytes min, 4.90KBytes mean, and 47.85KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


10. Object '"HTML"'

contribution: 15.57% by count and 10.90% by volume
rates: 4.67xact/sec or 0.18Mbits/sec
totals: 0.01Mxact and 0.03GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.33KBytes min, 4.99KBytes mean, and 68.83KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


11. Object '"download"'

contribution: 0.14% by count and 6.04% by volume
rates: 0.04xact/sec or 0.10Mbits/sec
totals: 0.00Mxact and 0.01GByte
response time: n/a min, n/a mean, and n/a max
response size: 76.29KBytes min, 309.99KBytes mean, and 656.39KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


12. Object '"other"'

contribution: 7.88% by count and 26.69% by volume
rates: 2.36xact/sec or 0.45Mbits/sec
totals: 0.00Mxact and 0.07GByte
response time: n/a min, n/a mean, and n/a max
response size: 6.79KBytes min, 24.18KBytes mean, and 94.76KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


13. Object 'all content types'

contribution: 85.56% by count and 86.22% by volume
rates: 25.64xact/sec or 1.44Mbits/sec
totals: 0.03Mxact and 0.21GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.32KBytes min, 7.19KBytes mean, and 656.39KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




14. Object 'hits'

contribution: 42.73% by count and 29.78% by volume
rates: 12.81xact/sec or 0.50Mbits/sec
totals: 0.02Mxact and 0.07GByte
response time: 1.00msec min, 39.38msec mean, and 535.00msec max
response size: 0.32KBytes min, 4.97KBytes mean, and 656.39KBytes max
response time distribution
object.hits.rptm.fig.scope=sides=client__phases=idle
object size distribution
object.hits.size.fig.scope=sides=client__phases=idle
response time trace
object.hits.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




15. Object 'misses'

contribution: 42.83% by count and 56.45% by volume
rates: 12.83xact/sec or 0.94Mbits/sec
totals: 0.02Mxact and 0.14GByte
response time: 171.00msec min, 2771.58msec mean, and 8627.00msec max
response size: 0.33KBytes min, 9.40KBytes mean, and 656.39KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=client__phases=idle
object size distribution
object.misses.size.fig.scope=sides=client__phases=idle
response time trace
object.misses.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




16. Object 'hits and misses'

contribution: 85.56% by count and 86.22% by volume
rates: 25.64xact/sec or 1.44Mbits/sec
totals: 0.03Mxact and 0.21GByte
response time: 1.00msec min, 1407.03msec mean, and 8627.00msec max
response size: 0.32KBytes min, 7.19KBytes mean, and 656.39KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=client__phases=idle
object size distribution
object.hits_and_misses.size.fig.scope=sides=client__phases=idle
response time trace
object.hits_and_misses.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'all replies' class.




17. Object 'ims/200'

contribution: 5.85% by count and 7.71% by volume
rates: 1.75xact/sec or 0.13Mbits/sec
totals: 0.00Mxact and 0.02GByte
response time: 1.00msec min, 1694.63msec mean, and 7903.00msec max
response size: 0.29KBytes min, 9.40KBytes mean, and 656.31KBytes max
response time distribution
object.ims_sc200.rptm.fig.scope=sides=client__phases=idle
object size distribution
object.ims_sc200.size.fig.scope=sides=client__phases=idle

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




18. Object 'ims/304'

contribution: 3.03% by count and 0.06% by volume
rates: 0.91xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 1.00msec min, 1267.58msec mean, and 7481.00msec max
response size: 0.13KBytes min, 0.13KBytes mean, and 0.13KBytes max
response time distribution
object.ims_sc304.rptm.fig.scope=sides=client__phases=idle
object size distribution
object.ims_sc304.size.fig.scope=sides=client__phases=idle

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




19. Object 'all ims'

contribution: 8.88% by count and 7.77% by volume
rates: 2.66xact/sec or 0.13Mbits/sec
totals: 0.00Mxact and 0.02GByte
response time: 1.00msec min, 1549.07msec mean, and 7903.00msec max
response size: 0.13KBytes min, 6.24KBytes mean, and 656.31KBytes max
response time distribution
object.ims_scAll.rptm.fig.scope=sides=client__phases=idle
object size distribution
object.ims_scAll.size.fig.scope=sides=client__phases=idle
response time trace
object.ims_scAll.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'all replies' class.




20. Object 'cachable'

contribution: 68.61% by count and 62.28% by volume
rates: 20.56xact/sec or 1.04Mbits/sec
totals: 0.02Mxact and 0.15GByte
response time: 1.00msec min, 1068.39msec mean, and 8627.00msec max
response size: 0.32KBytes min, 6.48KBytes mean, and 656.39KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




21. Object 'not cachable'

contribution: 16.95% by count and 23.94% by volume
rates: 5.08xact/sec or 0.40Mbits/sec
totals: 0.01Mxact and 0.06GByte
response time: 180.00msec min, 2777.34msec mean, and 6999.00msec max
response size: 0.38KBytes min, 10.07KBytes mean, and 442.84KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




22. Object 'cachable and not'

contribution: 85.56% by count and 86.22% by volume
rates: 25.64xact/sec or 1.44Mbits/sec
totals: 0.03Mxact and 0.21GByte
response time: 1.00msec min, 1407.03msec mean, and 8627.00msec max
response size: 0.32KBytes min, 7.19KBytes mean, and 656.39KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'all replies' class.




23. Object 'fill'

contribution: 25.88% by count and 32.51% by volume
rates: 7.75xact/sec or 0.54Mbits/sec
totals: 0.01Mxact and 0.08GByte
response time: 171.00msec min, 2767.80msec mean, and 8627.00msec max
response size: 0.33KBytes min, 8.96KBytes mean, and 656.39KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'all replies' class.




24. Object 'reload'

contribution: 5.18% by count and 5.36% by volume
rates: 1.55xact/sec or 0.09Mbits/sec
totals: 0.00Mxact and 0.01GByte
response time: 190.00msec min, 2774.38msec mean, and 8081.00msec max
response size: 0.34KBytes min, 7.37KBytes mean, and 536.63KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=client__phases=idle
object size distribution
object.reload.size.fig.scope=sides=client__phases=idle
response time trace
object.reload.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'abort'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'HEAD'

contribution: 0.00% by count and 0.00% by volume
rates: 0.00xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 1179.00msec min, 1179.00msec mean, and 1179.00msec max
response size: 0.38KBytes min, 0.38KBytes mean, and 0.38KBytes max
response time distribution
object.method_head.rptm.fig.scope=sides=client__phases=idle
object size distribution
object.method_head.size.fig.scope=sides=client__phases=idle
response time trace
object.method_head.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




29. Object 'POST'

contribution: 0.38% by count and 0.65% by volume
rates: 0.11xact/sec or 0.01Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 479.00msec min, 2977.19msec mean, and 5779.00msec max
response size: 0.26KBytes min, 12.37KBytes mean, and 62.20KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=client__phases=idle
object size distribution
object.method_post.size.fig.scope=sides=client__phases=idle
response time trace
object.method_post.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




30. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'all non-gets'

contribution: 0.38% by count and 0.65% by volume
rates: 0.11xact/sec or 0.01Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 479.00msec min, 2963.96msec mean, and 5779.00msec max
response size: 0.26KBytes min, 12.29KBytes mean, and 62.20KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=client__phases=idle
object size distribution
object.method_all.size.fig.scope=sides=client__phases=idle
response time trace
object.method_all.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.

This object class belongs to the 'all replies' class.




32. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 29.97xact/sec or 1.67Mbits/sec
totals: 0.04Mxact and 0.24GByte
response time: 1.00msec min, 1496.36msec mean, and 8627.00msec max
response size: 0.13KBytes min, 7.13KBytes mean, and 656.39KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=client__phases=idle
object size distribution
object.rep.size.fig.scope=sides=client__phases=idle
response time trace
object.rep.rptm.trace.scope=sides=client__phases=idle

No description is available for this object class.