Chamomile, polymix4: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)		 Volume
(Mbits/sec)
offered 173.73 13.83
measured 173.73 13.82
Load trace
load.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

The load table shows offered and measured load from server side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)		 BHR
(%)
offered 0.00 0.00
measured 0.00 0.00

The server-side hit ratios should always be zero. If a request reaches a server, it is, by definition, a miss.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 11629386.00 11629386.00 5.74
waiting 0.00 0.00 0.00
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 11629387.00 11629386.00 442.92
established 11629387.00 11629386.00 440.59
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
575.00 0.00 575.00
population level trace
populus.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)		 Volume
(%)		 Count
(xact/sec)		 Volume
(Mbits/sec)		 Count
(xact,M)		 Volume
(Gbyte)
"image" 63.11 29.83 109.53 4.12 7.33 33.68
"HTML" 14.34 11.83 24.89 1.63 1.67 13.35
"download" 0.39 12.62 0.68 1.74 0.05 14.25
"other" 17.11 41.86 29.70 5.78 1.99 47.27
all content types 94.95 96.14 164.80 13.28 11.03 108.54
hits 0.00 0.00 0.00 0.00 0.00 0.00
misses 94.95 96.14 164.80 13.28 11.03 108.54
hits and misses 94.95 96.14 164.80 13.28 11.03 108.54
ims/200 0.00 0.00 0.00 0.00 0.00 0.00
ims/304 0.00 0.00 0.01 0.00 0.00 0.00
all ims 0.00 0.00 0.01 0.00 0.00 0.00
cachable 67.93 68.00 117.90 9.40 7.89 76.78
not cachable 27.02 28.14 46.90 3.89 3.14 31.77
cachable and not 94.95 96.14 164.80 13.28 11.03 108.54
fill 67.93 68.00 117.90 9.40 7.89 76.78
reload 4.67 3.36 8.11 0.46 0.54 3.80
abort 0.10 0.09 0.17 0.01 0.01 0.10
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.00 0.00 0.00 0.00 0.00 0.00
POST 0.37 0.50 0.65 0.07 0.04 0.57
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.37 0.50 0.65 0.07 0.04 0.57
all replies 100.00 100.00 173.57 13.82 11.62 112.91

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"image" n/a n/a n/a 0.26 4.82 65.97
"HTML" n/a n/a n/a 0.31 8.40 71.46
"download" n/a n/a n/a 34.87 329.72 2488.48
"other" n/a n/a n/a 6.80 24.93 98.10
all content types n/a n/a n/a 0.26 10.32 2488.48
hits n/a n/a n/a n/a n/a n/a
misses 0.00 2549.37 238492.00 0.26 10.32 2488.48
hits and misses 0.00 2549.37 238492.00 0.26 10.32 2488.48
ims/200 4.00 2313.09 4362.00 0.79 5.08 17.56
ims/304 10.00 2566.96 5027.00 0.10 0.10 0.10
all ims 4.00 2552.65 5027.00 0.10 0.38 17.56
cachable 0.00 2548.59 20190.00 0.32 10.20 1652.77
not cachable 0.00 2551.33 238492.00 0.26 10.61 2488.48
cachable and not 0.00 2549.37 238492.00 0.26 10.32 2488.48
fill 0.00 2548.59 20190.00 0.32 10.20 1652.77
reload 0.00 2532.65 12053.00 0.26 7.33 1652.77
abort 0.00 2534.05 6089.00 0.27 9.83 1652.72
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD n/a n/a n/a n/a n/a n/a
POST 80.00 2567.40 13004.00 0.31 13.68 1627.58
PUT n/a n/a n/a n/a n/a n/a
all non-gets 80.00 2567.40 13004.00 0.31 13.68 1627.58
all replies 0.00 2548.66 238492.00 0.10 10.19 2488.48

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' classe) or '304 Not Modified' (the 'ims/304' classe) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

No errors detected in the given scope.


9. Object '"image"'

contribution: 63.11% by count and 29.83% by volume
rates: 109.53xact/sec or 4.12Mbits/sec
totals: 7.33Mxact and 33.68GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.26KBytes min, 4.82KBytes mean, and 65.97KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


10. Object '"HTML"'

contribution: 14.34% by count and 11.83% by volume
rates: 24.89xact/sec or 1.63Mbits/sec
totals: 1.67Mxact and 13.35GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.31KBytes min, 8.40KBytes mean, and 71.46KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


11. Object '"download"'

contribution: 0.39% by count and 12.62% by volume
rates: 0.68xact/sec or 1.74Mbits/sec
totals: 0.05Mxact and 14.25GByte
response time: n/a min, n/a mean, and n/a max
response size: 34.87KBytes min, 329.72KBytes mean, and 2488.48KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


12. Object '"other"'

contribution: 17.11% by count and 41.86% by volume
rates: 29.70xact/sec or 5.78Mbits/sec
totals: 1.99Mxact and 47.27GByte
response time: n/a min, n/a mean, and n/a max
response size: 6.80KBytes min, 24.93KBytes mean, and 98.10KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


13. Object 'all content types'

contribution: 94.95% by count and 96.14% by volume
rates: 164.80xact/sec or 13.28Mbits/sec
totals: 11.03Mxact and 108.54GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.26KBytes min, 10.32KBytes mean, and 2488.48KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




14. Object 'hits'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'hits and misses' class.




15. Object 'misses'

contribution: 94.95% by count and 96.14% by volume
rates: 164.80xact/sec or 13.28Mbits/sec
totals: 11.03Mxact and 108.54GByte
response time: 0.00msec min, 2549.37msec mean, and 238492.00msec max
response size: 0.26KBytes min, 10.32KBytes mean, and 2488.48KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.misses.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.misses.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




16. Object 'hits and misses'

contribution: 94.95% by count and 96.14% by volume
rates: 164.80xact/sec or 13.28Mbits/sec
totals: 11.03Mxact and 108.54GByte
response time: 0.00msec min, 2549.37msec mean, and 238492.00msec max
response size: 0.26KBytes min, 10.32KBytes mean, and 2488.48KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.hits_and_misses.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.hits_and_misses.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




17. Object 'ims/200'

contribution: 0.00% by count and 0.00% by volume
rates: 0.00xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 4.00msec min, 2313.09msec mean, and 4362.00msec max
response size: 0.79KBytes min, 5.08KBytes mean, and 17.56KBytes max
response time distribution
object.ims_sc200.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_sc200.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




18. Object 'ims/304'

contribution: 0.00% by count and 0.00% by volume
rates: 0.01xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 10.00msec min, 2566.96msec mean, and 5027.00msec max
response size: 0.10KBytes min, 0.10KBytes mean, and 0.10KBytes max
response time distribution
object.ims_sc304.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_sc304.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




19. Object 'all ims'

contribution: 0.00% by count and 0.00% by volume
rates: 0.01xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 4.00msec min, 2552.65msec mean, and 5027.00msec max
response size: 0.10KBytes min, 0.38KBytes mean, and 17.56KBytes max
response time distribution
object.ims_scAll.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_scAll.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.ims_scAll.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




20. Object 'cachable'

contribution: 67.93% by count and 68.00% by volume
rates: 117.90xact/sec or 9.40Mbits/sec
totals: 7.89Mxact and 76.78GByte
response time: 0.00msec min, 2548.59msec mean, and 20190.00msec max
response size: 0.32KBytes min, 10.20KBytes mean, and 1652.77KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




21. Object 'not cachable'

contribution: 27.02% by count and 28.14% by volume
rates: 46.90xact/sec or 3.89Mbits/sec
totals: 3.14Mxact and 31.77GByte
response time: 0.00msec min, 2551.33msec mean, and 238492.00msec max
response size: 0.26KBytes min, 10.61KBytes mean, and 2488.48KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




22. Object 'cachable and not'

contribution: 94.95% by count and 96.14% by volume
rates: 164.80xact/sec or 13.28Mbits/sec
totals: 11.03Mxact and 108.54GByte
response time: 0.00msec min, 2549.37msec mean, and 238492.00msec max
response size: 0.26KBytes min, 10.32KBytes mean, and 2488.48KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




23. Object 'fill'

contribution: 67.93% by count and 68.00% by volume
rates: 117.90xact/sec or 9.40Mbits/sec
totals: 7.89Mxact and 76.78GByte
response time: 0.00msec min, 2548.59msec mean, and 20190.00msec max
response size: 0.32KBytes min, 10.20KBytes mean, and 1652.77KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




24. Object 'reload'

contribution: 4.67% by count and 3.36% by volume
rates: 8.11xact/sec or 0.46Mbits/sec
totals: 0.54Mxact and 3.80GByte
response time: 0.00msec min, 2532.65msec mean, and 12053.00msec max
response size: 0.26KBytes min, 7.33KBytes mean, and 1652.77KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.reload.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.reload.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'abort'

contribution: 0.10% by count and 0.09% by volume
rates: 0.17xact/sec or 0.01Mbits/sec
totals: 0.01Mxact and 0.10GByte
response time: 0.00msec min, 2534.05msec mean, and 6089.00msec max
response size: 0.27KBytes min, 9.83KBytes mean, and 1652.72KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.abort.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'HEAD'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




29. Object 'POST'

contribution: 0.37% by count and 0.50% by volume
rates: 0.65xact/sec or 0.07Mbits/sec
totals: 0.04Mxact and 0.57GByte
response time: 80.00msec min, 2567.40msec mean, and 13004.00msec max
response size: 0.31KBytes min, 13.68KBytes mean, and 1627.58KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_post.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_post.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




30. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'all non-gets'

contribution: 0.37% by count and 0.50% by volume
rates: 0.65xact/sec or 0.07Mbits/sec
totals: 0.04Mxact and 0.57GByte
response time: 80.00msec min, 2567.40msec mean, and 13004.00msec max
response size: 0.31KBytes min, 13.68KBytes mean, and 1627.58KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_all.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_all.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




32. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 173.57xact/sec or 13.82Mbits/sec
totals: 11.62Mxact and 112.91GByte
response time: 0.00msec min, 2548.66msec mean, and 238492.00msec max
response size: 0.10KBytes min, 10.19KBytes mean, and 2488.48KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.rep.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.rep.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.