Chamomile, polymix4: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)		 Volume
(Mbits/sec)
offered 107.00 10.04
measured 107.00 10.03
Load trace
load.trace.scope=sides=server__phases=framp

The load table shows offered and measured load from server side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)		 BHR
(%)
offered 0.00 0.00
measured 0.00 0.00

The server-side hit ratios should always be zero. If a request reaches a server, it is, by definition, a miss.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 129052.00 129046.00 4.62
waiting 0.00 0.00 0.00
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=server__phases=framp

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 129603.00 129046.00 275.40
established 129573.00 129046.00 274.26
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=server__phases=framp

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
575.00 0.00 575.00
population level trace
populus.level.trace.scope=sides=server__phases=framp

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)		 Volume
(%)		 Count
(xact/sec)		 Volume
(Mbits/sec)		 Count
(xact,M)		 Volume
(Gbyte)
"image" 63.44 25.14 67.80 2.52 0.08 0.37
"HTML" 15.10 11.10 16.14 1.11 0.02 0.16
"download" 0.59 20.55 0.63 2.06 0.00 0.30
"other" 20.34 42.73 21.74 4.29 0.03 0.63
all content types 99.48 99.53 106.32 9.99 0.13 1.47
hits 0.00 0.00 0.00 0.00 0.00 0.00
misses 99.48 99.53 106.32 9.99 0.13 1.47
hits and misses 99.48 99.53 106.32 9.99 0.13 1.47
ims/200 0.00 0.00 0.00 0.00 0.00 0.00
ims/304 0.00 0.00 0.00 0.00 0.00 0.00
all ims 0.00 0.00 0.00 0.00 0.00 0.00
cachable 77.99 73.80 83.36 7.40 0.10 1.09
not cachable 21.48 25.72 22.96 2.58 0.03 0.38
cachable and not 99.48 99.53 106.32 9.99 0.13 1.47
fill 77.99 73.80 83.36 7.40 0.10 1.09
reload 0.47 0.39 0.50 0.04 0.00 0.01
abort 0.11 0.09 0.12 0.01 0.00 0.00
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.00 0.00 0.00 0.00 0.00 0.00
POST 0.06 0.08 0.06 0.01 0.00 0.00
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.06 0.08 0.06 0.01 0.00 0.00
all replies 100.00 100.00 106.88 10.03 0.13 1.48

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"image" n/a n/a n/a 0.27 4.76 65.97
"HTML" n/a n/a n/a 0.33 8.83 71.41
"download" n/a n/a n/a 56.13 416.69 2488.47
"other" n/a n/a n/a 7.07 25.24 68.80
all content types n/a n/a n/a 0.27 12.02 2488.47
hits n/a n/a n/a n/a n/a n/a
misses 0.00 2556.12 17087.00 0.27 12.02 2488.47
hits and misses 0.00 2556.12 17087.00 0.27 12.02 2488.47
ims/200 n/a n/a n/a n/a n/a n/a
ims/304 n/a n/a n/a n/a n/a n/a
all ims n/a n/a n/a n/a n/a n/a
cachable 0.00 2555.09 12841.00 0.32 11.37 1627.62
not cachable 0.00 2559.88 17087.00 0.27 14.39 2488.47
cachable and not 0.00 2556.12 17087.00 0.27 12.02 2488.47
fill 0.00 2555.09 12841.00 0.32 11.37 1627.62
reload 1.00 2489.64 5282.00 0.29 10.14 133.20
abort 457.00 2582.86 4495.00 0.34 9.44 90.41
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD n/a n/a n/a n/a n/a n/a
POST 391.00 2575.91 5151.00 0.43 16.54 46.74
PUT n/a n/a n/a n/a n/a n/a
all non-gets 391.00 2575.91 5151.00 0.43 16.54 46.74
all replies 0.00 2555.82 17087.00 0.27 12.02 2488.47

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' classe) or '304 Not Modified' (the 'ims/304' classe) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

No errors detected in the given scope.


9. Object '"image"'

contribution: 63.44% by count and 25.14% by volume
rates: 67.80xact/sec or 2.52Mbits/sec
totals: 0.08Mxact and 0.37GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.27KBytes min, 4.76KBytes mean, and 65.97KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


10. Object '"HTML"'

contribution: 15.10% by count and 11.10% by volume
rates: 16.14xact/sec or 1.11Mbits/sec
totals: 0.02Mxact and 0.16GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.33KBytes min, 8.83KBytes mean, and 71.41KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


11. Object '"download"'

contribution: 0.59% by count and 20.55% by volume
rates: 0.63xact/sec or 2.06Mbits/sec
totals: 0.00Mxact and 0.30GByte
response time: n/a min, n/a mean, and n/a max
response size: 56.13KBytes min, 416.69KBytes mean, and 2488.47KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


12. Object '"other"'

contribution: 20.34% by count and 42.73% by volume
rates: 21.74xact/sec or 4.29Mbits/sec
totals: 0.03Mxact and 0.63GByte
response time: n/a min, n/a mean, and n/a max
response size: 7.07KBytes min, 25.24KBytes mean, and 68.80KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


13. Object 'all content types'

contribution: 99.48% by count and 99.53% by volume
rates: 106.32xact/sec or 9.99Mbits/sec
totals: 0.13Mxact and 1.47GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.27KBytes min, 12.02KBytes mean, and 2488.47KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




14. Object 'hits'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'hits and misses' class.




15. Object 'misses'

contribution: 99.48% by count and 99.53% by volume
rates: 106.32xact/sec or 9.99Mbits/sec
totals: 0.13Mxact and 1.47GByte
response time: 0.00msec min, 2556.12msec mean, and 17087.00msec max
response size: 0.27KBytes min, 12.02KBytes mean, and 2488.47KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=server__phases=framp
object size distribution
object.misses.size.fig.scope=sides=server__phases=framp
response time trace
object.misses.rptm.trace.scope=sides=server__phases=framp

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




16. Object 'hits and misses'

contribution: 99.48% by count and 99.53% by volume
rates: 106.32xact/sec or 9.99Mbits/sec
totals: 0.13Mxact and 1.47GByte
response time: 0.00msec min, 2556.12msec mean, and 17087.00msec max
response size: 0.27KBytes min, 12.02KBytes mean, and 2488.47KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=server__phases=framp
object size distribution
object.hits_and_misses.size.fig.scope=sides=server__phases=framp
response time trace
object.hits_and_misses.rptm.trace.scope=sides=server__phases=framp

No description is available for this object class.

This object class belongs to the 'all replies' class.




17. Object 'ims/200'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all ims' class.




18. Object 'ims/304'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all ims' class.




19. Object 'all ims'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




20. Object 'cachable'

contribution: 77.99% by count and 73.80% by volume
rates: 83.36xact/sec or 7.40Mbits/sec
totals: 0.10Mxact and 1.09GByte
response time: 0.00msec min, 2555.09msec mean, and 12841.00msec max
response size: 0.32KBytes min, 11.37KBytes mean, and 1627.62KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=server__phases=framp

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




21. Object 'not cachable'

contribution: 21.48% by count and 25.72% by volume
rates: 22.96xact/sec or 2.58Mbits/sec
totals: 0.03Mxact and 0.38GByte
response time: 0.00msec min, 2559.88msec mean, and 17087.00msec max
response size: 0.27KBytes min, 14.39KBytes mean, and 2488.47KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=server__phases=framp

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




22. Object 'cachable and not'

contribution: 99.48% by count and 99.53% by volume
rates: 106.32xact/sec or 9.99Mbits/sec
totals: 0.13Mxact and 1.47GByte
response time: 0.00msec min, 2556.12msec mean, and 17087.00msec max
response size: 0.27KBytes min, 12.02KBytes mean, and 2488.47KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=server__phases=framp

No description is available for this object class.

This object class belongs to the 'all replies' class.




23. Object 'fill'

contribution: 77.99% by count and 73.80% by volume
rates: 83.36xact/sec or 7.40Mbits/sec
totals: 0.10Mxact and 1.09GByte
response time: 0.00msec min, 2555.09msec mean, and 12841.00msec max
response size: 0.32KBytes min, 11.37KBytes mean, and 1627.62KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=server__phases=framp

No description is available for this object class.

This object class belongs to the 'all replies' class.




24. Object 'reload'

contribution: 0.47% by count and 0.39% by volume
rates: 0.50xact/sec or 0.04Mbits/sec
totals: 0.00Mxact and 0.01GByte
response time: 1.00msec min, 2489.64msec mean, and 5282.00msec max
response size: 0.29KBytes min, 10.14KBytes mean, and 133.20KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=server__phases=framp
object size distribution
object.reload.size.fig.scope=sides=server__phases=framp
response time trace
object.reload.rptm.trace.scope=sides=server__phases=framp

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'abort'

contribution: 0.11% by count and 0.09% by volume
rates: 0.12xact/sec or 0.01Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 457.00msec min, 2582.86msec mean, and 4495.00msec max
response size: 0.34KBytes min, 9.44KBytes mean, and 90.41KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.abort.rptm.trace.scope=sides=server__phases=framp

No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'HEAD'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




29. Object 'POST'

contribution: 0.06% by count and 0.08% by volume
rates: 0.06xact/sec or 0.01Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 391.00msec min, 2575.91msec mean, and 5151.00msec max
response size: 0.43KBytes min, 16.54KBytes mean, and 46.74KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=server__phases=framp
object size distribution
object.method_post.size.fig.scope=sides=server__phases=framp
response time trace
object.method_post.rptm.trace.scope=sides=server__phases=framp

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




30. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'all non-gets'

contribution: 0.06% by count and 0.08% by volume
rates: 0.06xact/sec or 0.01Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 391.00msec min, 2575.91msec mean, and 5151.00msec max
response size: 0.43KBytes min, 16.54KBytes mean, and 46.74KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=server__phases=framp
object size distribution
object.method_all.size.fig.scope=sides=server__phases=framp
response time trace
object.method_all.rptm.trace.scope=sides=server__phases=framp

No description is available for this object class.

This object class belongs to the 'all replies' class.




32. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 106.88xact/sec or 10.03Mbits/sec
totals: 0.13Mxact and 1.48GByte
response time: 0.00msec min, 2555.82msec mean, and 17087.00msec max
response size: 0.27KBytes min, 12.02KBytes mean, and 2488.47KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=server__phases=framp
object size distribution
object.rep.size.fig.scope=sides=server__phases=framp
response time trace
object.rep.rptm.trace.scope=sides=server__phases=framp

No description is available for this object class.