Chamomile, polymix4: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)		 Volume
(Mbits/sec)
offered 84.88 5.94
measured 84.87 5.94
Load trace
load.trace.scope=sides=server__phases=inc1

The load table shows offered and measured load from server side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)		 BHR
(%)
offered 0.00 0.00
measured 0.00 0.00

The server-side hit ratios should always be zero. If a request reaches a server, it is, by definition, a miss.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 102641.00 102636.00 2.22
waiting 0.00 0.00 0.00
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=server__phases=inc1

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 103070.00 102636.00 215.80
established 103064.00 102636.00 215.08
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=server__phases=inc1

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
0.00 0.00 575.00
population level trace
populus.level.trace.scope=sides=server__phases=inc1

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)		 Volume
(%)		 Count
(xact/sec)		 Volume
(Mbits/sec)		 Count
(xact,M)		 Volume
(Gbyte)
"image" 60.88 32.55 51.63 1.93 0.06 0.29
"HTML" 13.80 10.54 11.70 0.63 0.01 0.09
"download" 0.19 7.24 0.16 0.43 0.00 0.06
"other" 14.90 41.23 12.63 2.45 0.02 0.36
all content types 89.76 91.57 76.12 5.43 0.09 0.80
hits 0.00 0.00 0.00 0.00 0.00 0.00
misses 89.76 91.57 76.12 5.43 0.09 0.80
hits and misses 89.76 91.57 76.12 5.43 0.09 0.80
ims/200 0.00 0.00 0.00 0.00 0.00 0.00
ims/304 0.00 0.00 0.00 0.00 0.00 0.00
all ims 0.00 0.00 0.00 0.00 0.00 0.00
cachable 56.49 54.98 47.90 3.26 0.06 0.48
not cachable 33.27 36.58 28.21 2.17 0.03 0.32
cachable and not 89.76 91.57 76.12 5.43 0.09 0.80
fill 56.49 54.98 47.90 3.26 0.06 0.48
reload 9.44 7.30 8.00 0.43 0.01 0.06
abort 0.09 0.07 0.07 0.00 0.00 0.00
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.00 0.00 0.00 0.00 0.00 0.00
POST 0.80 1.13 0.68 0.07 0.00 0.01
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.80 1.13 0.68 0.07 0.00 0.01
all replies 100.00 100.00 84.80 5.94 0.10 0.88

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"image" n/a n/a n/a 0.26 4.79 46.25
"HTML" n/a n/a n/a 0.31 6.85 71.41
"download" n/a n/a n/a 57.30 348.31 1627.58
"other" n/a n/a n/a 6.80 24.80 94.78
all content types n/a n/a n/a 0.26 9.14 1627.58
hits n/a n/a n/a n/a n/a n/a
misses 0.00 2537.45 11793.00 0.26 9.14 1627.58
hits and misses 0.00 2537.45 11793.00 0.26 9.14 1627.58
ims/200 n/a n/a n/a n/a n/a n/a
ims/304 n/a n/a n/a n/a n/a n/a
all ims n/a n/a n/a n/a n/a n/a
cachable 0.00 2535.24 11793.00 0.32 8.72 1627.58
not cachable 0.00 2541.22 7380.00 0.26 9.85 442.72
cachable and not 0.00 2537.45 11793.00 0.26 9.14 1627.58
fill 0.00 2535.24 11793.00 0.32 8.72 1627.58
reload 0.00 2517.50 7341.00 0.27 6.93 672.40
abort 21.00 2449.43 4903.00 0.38 7.73 52.79
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD n/a n/a n/a n/a n/a n/a
POST 84.00 2595.91 6583.00 0.32 12.63 663.93
PUT n/a n/a n/a n/a n/a n/a
all non-gets 84.00 2595.91 6583.00 0.32 12.63 663.93
all replies 0.00 2536.04 11793.00 0.26 8.96 1627.58

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' classe) or '304 Not Modified' (the 'ims/304' classe) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

No errors detected in the given scope.


9. Object '"image"'

contribution: 60.88% by count and 32.55% by volume
rates: 51.63xact/sec or 1.93Mbits/sec
totals: 0.06Mxact and 0.29GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.26KBytes min, 4.79KBytes mean, and 46.25KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


10. Object '"HTML"'

contribution: 13.80% by count and 10.54% by volume
rates: 11.70xact/sec or 0.63Mbits/sec
totals: 0.01Mxact and 0.09GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.31KBytes min, 6.85KBytes mean, and 71.41KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


11. Object '"download"'

contribution: 0.19% by count and 7.24% by volume
rates: 0.16xact/sec or 0.43Mbits/sec
totals: 0.00Mxact and 0.06GByte
response time: n/a min, n/a mean, and n/a max
response size: 57.30KBytes min, 348.31KBytes mean, and 1627.58KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


12. Object '"other"'

contribution: 14.90% by count and 41.23% by volume
rates: 12.63xact/sec or 2.45Mbits/sec
totals: 0.02Mxact and 0.36GByte
response time: n/a min, n/a mean, and n/a max
response size: 6.80KBytes min, 24.80KBytes mean, and 94.78KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


13. Object 'all content types'

contribution: 89.76% by count and 91.57% by volume
rates: 76.12xact/sec or 5.43Mbits/sec
totals: 0.09Mxact and 0.80GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.26KBytes min, 9.14KBytes mean, and 1627.58KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




14. Object 'hits'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'hits and misses' class.




15. Object 'misses'

contribution: 89.76% by count and 91.57% by volume
rates: 76.12xact/sec or 5.43Mbits/sec
totals: 0.09Mxact and 0.80GByte
response time: 0.00msec min, 2537.45msec mean, and 11793.00msec max
response size: 0.26KBytes min, 9.14KBytes mean, and 1627.58KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=server__phases=inc1
object size distribution
object.misses.size.fig.scope=sides=server__phases=inc1
response time trace
object.misses.rptm.trace.scope=sides=server__phases=inc1

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




16. Object 'hits and misses'

contribution: 89.76% by count and 91.57% by volume
rates: 76.12xact/sec or 5.43Mbits/sec
totals: 0.09Mxact and 0.80GByte
response time: 0.00msec min, 2537.45msec mean, and 11793.00msec max
response size: 0.26KBytes min, 9.14KBytes mean, and 1627.58KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=server__phases=inc1
object size distribution
object.hits_and_misses.size.fig.scope=sides=server__phases=inc1
response time trace
object.hits_and_misses.rptm.trace.scope=sides=server__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




17. Object 'ims/200'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all ims' class.




18. Object 'ims/304'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all ims' class.




19. Object 'all ims'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




20. Object 'cachable'

contribution: 56.49% by count and 54.98% by volume
rates: 47.90xact/sec or 3.26Mbits/sec
totals: 0.06Mxact and 0.48GByte
response time: 0.00msec min, 2535.24msec mean, and 11793.00msec max
response size: 0.32KBytes min, 8.72KBytes mean, and 1627.58KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=server__phases=inc1

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




21. Object 'not cachable'

contribution: 33.27% by count and 36.58% by volume
rates: 28.21xact/sec or 2.17Mbits/sec
totals: 0.03Mxact and 0.32GByte
response time: 0.00msec min, 2541.22msec mean, and 7380.00msec max
response size: 0.26KBytes min, 9.85KBytes mean, and 442.72KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=server__phases=inc1

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




22. Object 'cachable and not'

contribution: 89.76% by count and 91.57% by volume
rates: 76.12xact/sec or 5.43Mbits/sec
totals: 0.09Mxact and 0.80GByte
response time: 0.00msec min, 2537.45msec mean, and 11793.00msec max
response size: 0.26KBytes min, 9.14KBytes mean, and 1627.58KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=server__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




23. Object 'fill'

contribution: 56.49% by count and 54.98% by volume
rates: 47.90xact/sec or 3.26Mbits/sec
totals: 0.06Mxact and 0.48GByte
response time: 0.00msec min, 2535.24msec mean, and 11793.00msec max
response size: 0.32KBytes min, 8.72KBytes mean, and 1627.58KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=server__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




24. Object 'reload'

contribution: 9.44% by count and 7.30% by volume
rates: 8.00xact/sec or 0.43Mbits/sec
totals: 0.01Mxact and 0.06GByte
response time: 0.00msec min, 2517.50msec mean, and 7341.00msec max
response size: 0.27KBytes min, 6.93KBytes mean, and 672.40KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=server__phases=inc1
object size distribution
object.reload.size.fig.scope=sides=server__phases=inc1
response time trace
object.reload.rptm.trace.scope=sides=server__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'abort'

contribution: 0.09% by count and 0.07% by volume
rates: 0.07xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 21.00msec min, 2449.43msec mean, and 4903.00msec max
response size: 0.38KBytes min, 7.73KBytes mean, and 52.79KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.abort.rptm.trace.scope=sides=server__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'HEAD'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




29. Object 'POST'

contribution: 0.80% by count and 1.13% by volume
rates: 0.68xact/sec or 0.07Mbits/sec
totals: 0.00Mxact and 0.01GByte
response time: 84.00msec min, 2595.91msec mean, and 6583.00msec max
response size: 0.32KBytes min, 12.63KBytes mean, and 663.93KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=server__phases=inc1
object size distribution
object.method_post.size.fig.scope=sides=server__phases=inc1
response time trace
object.method_post.rptm.trace.scope=sides=server__phases=inc1

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




30. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'all non-gets'

contribution: 0.80% by count and 1.13% by volume
rates: 0.68xact/sec or 0.07Mbits/sec
totals: 0.00Mxact and 0.01GByte
response time: 84.00msec min, 2595.91msec mean, and 6583.00msec max
response size: 0.32KBytes min, 12.63KBytes mean, and 663.93KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=server__phases=inc1
object size distribution
object.method_all.size.fig.scope=sides=server__phases=inc1
response time trace
object.method_all.rptm.trace.scope=sides=server__phases=inc1

No description is available for this object class.

This object class belongs to the 'all replies' class.




32. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 84.80xact/sec or 5.94Mbits/sec
totals: 0.10Mxact and 0.88GByte
response time: 0.00msec min, 2536.04msec mean, and 11793.00msec max
response size: 0.26KBytes min, 8.96KBytes mean, and 1627.58KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=server__phases=inc1
object size distribution
object.rep.size.fig.scope=sides=server__phases=inc1
response time trace
object.rep.rptm.trace.scope=sides=server__phases=inc1

No description is available for this object class.