iMimic, polymix4: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)		 Volume
(Mbits/sec)
offered 419.76 33.63
measured 419.76 33.60
Load trace
load.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

The load table shows offered and measured load from server side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)		 BHR
(%)
offered 0.00 0.00
measured 0.00 0.00

The server-side hit ratios should always be zero. If a request reaches a server, it is, by definition, a miss.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 80146307.00 80146307.00 13.52
waiting 0.00 0.00 0.00
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 24274335.00 24274274.00 2493.11
established 24274286.00 24274274.00 2477.63
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
777.00 0.00 0.00
population level trace
populus.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)		 Volume
(%)		 Count
(xact/sec)		 Volume
(Mbits/sec)		 Count
(xact,M)		 Volume
(Gbyte)
"image" 62.50 29.75 262.12 9.99 50.05 232.95
"HTML" 13.66 11.71 57.28 3.94 10.94 91.72
"download" 0.42 11.91 1.75 4.00 0.33 93.27
"other" 17.40 42.87 72.96 14.40 13.93 335.70
all content types 93.98 96.24 394.11 32.34 75.25 753.64
hits 0.00 0.00 0.00 0.00 0.00 0.00
misses 93.98 96.24 394.11 32.34 75.25 753.64
hits and misses 93.98 96.24 394.11 32.34 75.25 753.64
ims/200 1.50 1.43 6.29 0.48 1.20 11.21
ims/304 1.56 0.02 6.55 0.01 1.25 0.14
all ims 3.06 1.45 12.84 0.49 2.45 11.34
cachable 69.80 71.72 292.72 24.10 55.89 561.62
not cachable 24.18 24.52 101.39 8.24 19.36 192.03
cachable and not 93.98 96.24 394.11 32.34 75.25 753.64
fill 69.80 71.72 292.72 24.10 55.89 561.62
reload 2.77 2.04 11.60 0.69 2.21 16.01
abort 0.09 0.10 0.39 0.03 0.08 0.75
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.01 0.00 0.03 0.00 0.01 0.00
POST 0.19 0.27 0.79 0.09 0.15 2.08
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.19 0.27 0.82 0.09 0.16 2.08
all replies 100.00 100.00 419.37 33.60 80.07 783.08

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"image" n/a n/a n/a 0.29 4.88 66.00
"HTML" n/a n/a n/a 0.31 8.79 89.92
"download" n/a n/a n/a 18.42 293.52 2218.91
"other" n/a n/a n/a 6.35 25.27 99.12
all content types n/a n/a n/a 0.29 10.50 2218.91
hits n/a n/a n/a n/a n/a n/a
misses 0.00 2551.55 29713.00 0.29 10.50 2218.91
hits and misses 0.00 2551.55 29713.00 0.29 10.50 2218.91
ims/200 0.00 2580.44 23890.00 0.32 9.78 2218.91
ims/304 0.00 2546.42 11712.00 0.06 0.11 0.13
all ims 0.00 2563.08 23890.00 0.06 4.85 2218.91
cachable 0.00 2548.82 29713.00 0.35 10.54 1991.33
not cachable 0.00 2559.43 22300.00 0.29 10.40 2218.91
cachable and not 0.00 2551.55 29713.00 0.29 10.50 2218.91
fill 0.00 2548.82 29713.00 0.35 10.54 1991.33
reload 0.00 2577.12 24157.00 0.32 7.58 1991.33
abort 0.00 2525.49 9937.00 0.32 10.43 1263.98
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD 0.00 2526.03 8186.00 0.32 0.38 0.44
POST 0.00 2608.30 17842.00 0.34 14.48 2218.88
PUT n/a n/a n/a n/a n/a n/a
all non-gets 0.00 2605.38 17842.00 0.32 13.98 2218.88
all replies 0.00 2552.72 29713.00 0.06 10.25 2218.91

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' classe) or '304 Not Modified' (the 'ims/304' classe) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

The total of 9 errors detected. Out of those errors, 0xact or 0.00% of all transactions were classified as transaction errors.

Error Count Contribution (%)
(c17) connection closed before sending headers 9 100.00

The 'Errors' table shows detected errors. For each error type, the number of errors and their contribution towards total error count are shown.




9. Object '"image"'

contribution: 62.50% by count and 29.75% by volume
rates: 262.12xact/sec or 9.99Mbits/sec
totals: 50.05Mxact and 232.95GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.29KBytes min, 4.88KBytes mean, and 66.00KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


10. Object '"HTML"'

contribution: 13.66% by count and 11.71% by volume
rates: 57.28xact/sec or 3.94Mbits/sec
totals: 10.94Mxact and 91.72GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.31KBytes min, 8.79KBytes mean, and 89.92KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


11. Object '"download"'

contribution: 0.42% by count and 11.91% by volume
rates: 1.75xact/sec or 4.00Mbits/sec
totals: 0.33Mxact and 93.27GByte
response time: n/a min, n/a mean, and n/a max
response size: 18.42KBytes min, 293.52KBytes mean, and 2218.91KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


12. Object '"other"'

contribution: 17.40% by count and 42.87% by volume
rates: 72.96xact/sec or 14.40Mbits/sec
totals: 13.93Mxact and 335.70GByte
response time: n/a min, n/a mean, and n/a max
response size: 6.35KBytes min, 25.27KBytes mean, and 99.12KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


13. Object 'all content types'

contribution: 93.98% by count and 96.24% by volume
rates: 394.11xact/sec or 32.34Mbits/sec
totals: 75.25Mxact and 753.64GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.29KBytes min, 10.50KBytes mean, and 2218.91KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




14. Object 'hits'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'hits and misses' class.




15. Object 'misses'

contribution: 93.98% by count and 96.24% by volume
rates: 394.11xact/sec or 32.34Mbits/sec
totals: 75.25Mxact and 753.64GByte
response time: 0.00msec min, 2551.55msec mean, and 29713.00msec max
response size: 0.29KBytes min, 10.50KBytes mean, and 2218.91KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.misses.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.misses.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




16. Object 'hits and misses'

contribution: 93.98% by count and 96.24% by volume
rates: 394.11xact/sec or 32.34Mbits/sec
totals: 75.25Mxact and 753.64GByte
response time: 0.00msec min, 2551.55msec mean, and 29713.00msec max
response size: 0.29KBytes min, 10.50KBytes mean, and 2218.91KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.hits_and_misses.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.hits_and_misses.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




17. Object 'ims/200'

contribution: 1.50% by count and 1.43% by volume
rates: 6.29xact/sec or 0.48Mbits/sec
totals: 1.20Mxact and 11.21GByte
response time: 0.00msec min, 2580.44msec mean, and 23890.00msec max
response size: 0.32KBytes min, 9.78KBytes mean, and 2218.91KBytes max
response time distribution
object.ims_sc200.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_sc200.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




18. Object 'ims/304'

contribution: 1.56% by count and 0.02% by volume
rates: 6.55xact/sec or 0.01Mbits/sec
totals: 1.25Mxact and 0.14GByte
response time: 0.00msec min, 2546.42msec mean, and 11712.00msec max
response size: 0.06KBytes min, 0.11KBytes mean, and 0.13KBytes max
response time distribution
object.ims_sc304.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_sc304.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




19. Object 'all ims'

contribution: 3.06% by count and 1.45% by volume
rates: 12.84xact/sec or 0.49Mbits/sec
totals: 2.45Mxact and 11.34GByte
response time: 0.00msec min, 2563.08msec mean, and 23890.00msec max
response size: 0.06KBytes min, 4.85KBytes mean, and 2218.91KBytes max
response time distribution
object.ims_scAll.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_scAll.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.ims_scAll.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




20. Object 'cachable'

contribution: 69.80% by count and 71.72% by volume
rates: 292.72xact/sec or 24.10Mbits/sec
totals: 55.89Mxact and 561.62GByte
response time: 0.00msec min, 2548.82msec mean, and 29713.00msec max
response size: 0.35KBytes min, 10.54KBytes mean, and 1991.33KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




21. Object 'not cachable'

contribution: 24.18% by count and 24.52% by volume
rates: 101.39xact/sec or 8.24Mbits/sec
totals: 19.36Mxact and 192.03GByte
response time: 0.00msec min, 2559.43msec mean, and 22300.00msec max
response size: 0.29KBytes min, 10.40KBytes mean, and 2218.91KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




22. Object 'cachable and not'

contribution: 93.98% by count and 96.24% by volume
rates: 394.11xact/sec or 32.34Mbits/sec
totals: 75.25Mxact and 753.64GByte
response time: 0.00msec min, 2551.55msec mean, and 29713.00msec max
response size: 0.29KBytes min, 10.50KBytes mean, and 2218.91KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




23. Object 'fill'

contribution: 69.80% by count and 71.72% by volume
rates: 292.72xact/sec or 24.10Mbits/sec
totals: 55.89Mxact and 561.62GByte
response time: 0.00msec min, 2548.82msec mean, and 29713.00msec max
response size: 0.35KBytes min, 10.54KBytes mean, and 1991.33KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




24. Object 'reload'

contribution: 2.77% by count and 2.04% by volume
rates: 11.60xact/sec or 0.69Mbits/sec
totals: 2.21Mxact and 16.01GByte
response time: 0.00msec min, 2577.12msec mean, and 24157.00msec max
response size: 0.32KBytes min, 7.58KBytes mean, and 1991.33KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.reload.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.reload.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'abort'

contribution: 0.09% by count and 0.10% by volume
rates: 0.39xact/sec or 0.03Mbits/sec
totals: 0.08Mxact and 0.75GByte
response time: 0.00msec min, 2525.49msec mean, and 9937.00msec max
response size: 0.32KBytes min, 10.43KBytes mean, and 1263.98KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.abort.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'HEAD'

contribution: 0.01% by count and 0.00% by volume
rates: 0.03xact/sec or 0.00Mbits/sec
totals: 0.01Mxact and 0.00GByte
response time: 0.00msec min, 2526.03msec mean, and 8186.00msec max
response size: 0.32KBytes min, 0.38KBytes mean, and 0.44KBytes max
response time distribution
object.method_head.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_head.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_head.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




29. Object 'POST'

contribution: 0.19% by count and 0.27% by volume
rates: 0.79xact/sec or 0.09Mbits/sec
totals: 0.15Mxact and 2.08GByte
response time: 0.00msec min, 2608.30msec mean, and 17842.00msec max
response size: 0.34KBytes min, 14.48KBytes mean, and 2218.88KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_post.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_post.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




30. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'all non-gets'

contribution: 0.19% by count and 0.27% by volume
rates: 0.82xact/sec or 0.09Mbits/sec
totals: 0.16Mxact and 2.08GByte
response time: 0.00msec min, 2605.38msec mean, and 17842.00msec max
response size: 0.32KBytes min, 13.98KBytes mean, and 2218.88KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_all.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_all.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




32. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 419.37xact/sec or 33.60Mbits/sec
totals: 80.07Mxact and 783.08GByte
response time: 0.00msec min, 2552.72msec mean, and 29713.00msec max
response size: 0.06KBytes min, 10.25KBytes mean, and 2218.91KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.rep.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.rep.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.