iMimic, polymix4: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)		 Volume
(Mbits/sec)
offered 522.88 36.78
measured 522.88 36.75
Load trace
load.trace.scope=sides=server__phases=top2

The load table shows offered and measured load from server side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)		 BHR
(%)
offered 0.00 0.00
measured 0.00 0.00

The server-side hit ratios should always be zero. If a request reaches a server, it is, by definition, a miss.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 7530452.00 7530447.00 17.62
waiting 0.00 0.00 0.00
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=server__phases=top2

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 2102059.00 2101969.00 3096.61
established 2102041.00 2101969.00 3025.58
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=server__phases=top2

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
0.00 0.00 777.00
population level trace
populus.level.trace.scope=sides=server__phases=top2

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)		 Volume
(%)		 Count
(xact/sec)		 Volume
(Mbits/sec)		 Count
(xact,M)		 Volume
(Gbyte)
"image" 52.53 28.45 274.47 10.46 3.95 18.38
"HTML" 9.69 8.82 50.63 3.24 0.73 5.70
"download" 0.24 7.94 1.27 2.92 0.02 5.13
"other" 13.98 39.18 73.04 14.40 1.05 25.31
all content types 76.45 84.38 399.41 31.01 5.75 54.52
hits 0.00 0.00 0.00 0.00 0.00 0.00
misses 76.45 84.38 399.41 31.01 5.75 54.52
hits and misses 76.45 84.38 399.41 31.01 5.75 54.52
ims/200 5.15 5.52 26.91 2.03 0.39 3.57
ims/304 6.30 0.08 32.89 0.03 0.47 0.05
all ims 11.45 5.60 59.80 2.06 0.86 3.62
cachable 40.38 45.84 210.95 16.85 3.04 29.62
not cachable 36.07 38.54 188.45 14.16 2.71 24.90
cachable and not 76.45 84.38 399.41 31.01 5.75 54.52
fill 40.38 45.84 210.95 16.85 3.04 29.62
reload 11.32 8.94 59.17 3.28 0.85 5.78
abort 0.08 0.09 0.41 0.03 0.01 0.06
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.02 0.00 0.13 0.00 0.00 0.00
POST 0.76 1.08 3.96 0.40 0.06 0.70
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.78 1.08 4.09 0.40 0.06 0.70
all replies 100.00 100.00 522.46 36.75 7.52 64.61

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"image" n/a n/a n/a 0.32 4.88 56.73
"HTML" n/a n/a n/a 0.34 8.19 89.92
"download" n/a n/a n/a 29.38 294.30 1263.98
"other" n/a n/a n/a 6.42 25.23 99.11
all content types n/a n/a n/a 0.32 9.94 1263.98
hits n/a n/a n/a n/a n/a n/a
misses 0.00 2606.65 26123.00 0.32 9.94 1263.98
hits and misses 0.00 2606.65 26123.00 0.32 9.94 1263.98
ims/200 0.00 2602.95 22470.00 0.32 9.65 1263.98
ims/304 0.00 2558.80 10982.00 0.06 0.11 0.13
all ims 0.00 2578.66 22470.00 0.06 4.41 1263.98
cachable 0.00 2609.33 26123.00 0.37 10.22 1263.98
not cachable 0.00 2603.64 17073.00 0.32 9.62 1037.87
cachable and not 0.00 2606.65 26123.00 0.32 9.94 1263.98
fill 0.00 2609.33 26123.00 0.37 10.22 1263.98
reload 0.00 2589.30 24157.00 0.32 7.11 1263.98
abort 0.00 2572.44 9937.00 0.32 10.16 982.82
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD 0.00 2620.49 8186.00 0.32 0.38 0.44
POST 0.00 2614.23 17196.00 0.34 12.81 1263.98
PUT n/a n/a n/a n/a n/a n/a
all non-gets 0.00 2614.43 17196.00 0.32 12.42 1263.98
all replies 0.00 2601.54 26123.00 0.06 9.00 1263.98

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' classe) or '304 Not Modified' (the 'ims/304' classe) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

The total of 6 errors detected. Out of those errors, 0xact or 0.00% of all transactions were classified as transaction errors.

Error Count Contribution (%)
(c17) connection closed before sending headers 6 100.00

The 'Errors' table shows detected errors. For each error type, the number of errors and their contribution towards total error count are shown.




9. Object '"image"'

contribution: 52.53% by count and 28.45% by volume
rates: 274.47xact/sec or 10.46Mbits/sec
totals: 3.95Mxact and 18.38GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.32KBytes min, 4.88KBytes mean, and 56.73KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


10. Object '"HTML"'

contribution: 9.69% by count and 8.82% by volume
rates: 50.63xact/sec or 3.24Mbits/sec
totals: 0.73Mxact and 5.70GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.34KBytes min, 8.19KBytes mean, and 89.92KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


11. Object '"download"'

contribution: 0.24% by count and 7.94% by volume
rates: 1.27xact/sec or 2.92Mbits/sec
totals: 0.02Mxact and 5.13GByte
response time: n/a min, n/a mean, and n/a max
response size: 29.38KBytes min, 294.30KBytes mean, and 1263.98KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


12. Object '"other"'

contribution: 13.98% by count and 39.18% by volume
rates: 73.04xact/sec or 14.40Mbits/sec
totals: 1.05Mxact and 25.31GByte
response time: n/a min, n/a mean, and n/a max
response size: 6.42KBytes min, 25.23KBytes mean, and 99.11KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


13. Object 'all content types'

contribution: 76.45% by count and 84.38% by volume
rates: 399.41xact/sec or 31.01Mbits/sec
totals: 5.75Mxact and 54.52GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.32KBytes min, 9.94KBytes mean, and 1263.98KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




14. Object 'hits'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'hits and misses' class.




15. Object 'misses'

contribution: 76.45% by count and 84.38% by volume
rates: 399.41xact/sec or 31.01Mbits/sec
totals: 5.75Mxact and 54.52GByte
response time: 0.00msec min, 2606.65msec mean, and 26123.00msec max
response size: 0.32KBytes min, 9.94KBytes mean, and 1263.98KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=server__phases=top2
object size distribution
object.misses.size.fig.scope=sides=server__phases=top2
response time trace
object.misses.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




16. Object 'hits and misses'

contribution: 76.45% by count and 84.38% by volume
rates: 399.41xact/sec or 31.01Mbits/sec
totals: 5.75Mxact and 54.52GByte
response time: 0.00msec min, 2606.65msec mean, and 26123.00msec max
response size: 0.32KBytes min, 9.94KBytes mean, and 1263.98KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=server__phases=top2
object size distribution
object.hits_and_misses.size.fig.scope=sides=server__phases=top2
response time trace
object.hits_and_misses.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




17. Object 'ims/200'

contribution: 5.15% by count and 5.52% by volume
rates: 26.91xact/sec or 2.03Mbits/sec
totals: 0.39Mxact and 3.57GByte
response time: 0.00msec min, 2602.95msec mean, and 22470.00msec max
response size: 0.32KBytes min, 9.65KBytes mean, and 1263.98KBytes max
response time distribution
object.ims_sc200.rptm.fig.scope=sides=server__phases=top2
object size distribution
object.ims_sc200.size.fig.scope=sides=server__phases=top2

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




18. Object 'ims/304'

contribution: 6.30% by count and 0.08% by volume
rates: 32.89xact/sec or 0.03Mbits/sec
totals: 0.47Mxact and 0.05GByte
response time: 0.00msec min, 2558.80msec mean, and 10982.00msec max
response size: 0.06KBytes min, 0.11KBytes mean, and 0.13KBytes max
response time distribution
object.ims_sc304.rptm.fig.scope=sides=server__phases=top2
object size distribution
object.ims_sc304.size.fig.scope=sides=server__phases=top2

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




19. Object 'all ims'

contribution: 11.45% by count and 5.60% by volume
rates: 59.80xact/sec or 2.06Mbits/sec
totals: 0.86Mxact and 3.62GByte
response time: 0.00msec min, 2578.66msec mean, and 22470.00msec max
response size: 0.06KBytes min, 4.41KBytes mean, and 1263.98KBytes max
response time distribution
object.ims_scAll.rptm.fig.scope=sides=server__phases=top2
object size distribution
object.ims_scAll.size.fig.scope=sides=server__phases=top2
response time trace
object.ims_scAll.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




20. Object 'cachable'

contribution: 40.38% by count and 45.84% by volume
rates: 210.95xact/sec or 16.85Mbits/sec
totals: 3.04Mxact and 29.62GByte
response time: 0.00msec min, 2609.33msec mean, and 26123.00msec max
response size: 0.37KBytes min, 10.22KBytes mean, and 1263.98KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




21. Object 'not cachable'

contribution: 36.07% by count and 38.54% by volume
rates: 188.45xact/sec or 14.16Mbits/sec
totals: 2.71Mxact and 24.90GByte
response time: 0.00msec min, 2603.64msec mean, and 17073.00msec max
response size: 0.32KBytes min, 9.62KBytes mean, and 1037.87KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




22. Object 'cachable and not'

contribution: 76.45% by count and 84.38% by volume
rates: 399.41xact/sec or 31.01Mbits/sec
totals: 5.75Mxact and 54.52GByte
response time: 0.00msec min, 2606.65msec mean, and 26123.00msec max
response size: 0.32KBytes min, 9.94KBytes mean, and 1263.98KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




23. Object 'fill'

contribution: 40.38% by count and 45.84% by volume
rates: 210.95xact/sec or 16.85Mbits/sec
totals: 3.04Mxact and 29.62GByte
response time: 0.00msec min, 2609.33msec mean, and 26123.00msec max
response size: 0.37KBytes min, 10.22KBytes mean, and 1263.98KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




24. Object 'reload'

contribution: 11.32% by count and 8.94% by volume
rates: 59.17xact/sec or 3.28Mbits/sec
totals: 0.85Mxact and 5.78GByte
response time: 0.00msec min, 2589.30msec mean, and 24157.00msec max
response size: 0.32KBytes min, 7.11KBytes mean, and 1263.98KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=server__phases=top2
object size distribution
object.reload.size.fig.scope=sides=server__phases=top2
response time trace
object.reload.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'abort'

contribution: 0.08% by count and 0.09% by volume
rates: 0.41xact/sec or 0.03Mbits/sec
totals: 0.01Mxact and 0.06GByte
response time: 0.00msec min, 2572.44msec mean, and 9937.00msec max
response size: 0.32KBytes min, 10.16KBytes mean, and 982.82KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.abort.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'HEAD'

contribution: 0.02% by count and 0.00% by volume
rates: 0.13xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 0.00msec min, 2620.49msec mean, and 8186.00msec max
response size: 0.32KBytes min, 0.38KBytes mean, and 0.44KBytes max
response time distribution
object.method_head.rptm.fig.scope=sides=server__phases=top2
object size distribution
object.method_head.size.fig.scope=sides=server__phases=top2
response time trace
object.method_head.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




29. Object 'POST'

contribution: 0.76% by count and 1.08% by volume
rates: 3.96xact/sec or 0.40Mbits/sec
totals: 0.06Mxact and 0.70GByte
response time: 0.00msec min, 2614.23msec mean, and 17196.00msec max
response size: 0.34KBytes min, 12.81KBytes mean, and 1263.98KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=server__phases=top2
object size distribution
object.method_post.size.fig.scope=sides=server__phases=top2
response time trace
object.method_post.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




30. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'all non-gets'

contribution: 0.78% by count and 1.08% by volume
rates: 4.09xact/sec or 0.40Mbits/sec
totals: 0.06Mxact and 0.70GByte
response time: 0.00msec min, 2614.43msec mean, and 17196.00msec max
response size: 0.32KBytes min, 12.42KBytes mean, and 1263.98KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=server__phases=top2
object size distribution
object.method_all.size.fig.scope=sides=server__phases=top2
response time trace
object.method_all.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.

This object class belongs to the 'all replies' class.




32. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 522.46xact/sec or 36.75Mbits/sec
totals: 7.52Mxact and 64.61GByte
response time: 0.00msec min, 2601.54msec mean, and 26123.00msec max
response size: 0.06KBytes min, 9.00KBytes mean, and 1263.98KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=server__phases=top2
object size distribution
object.rep.size.fig.scope=sides=server__phases=top2
response time trace
object.rep.rptm.trace.scope=sides=server__phases=top2

No description is available for this object class.