Stratacache D-25, polymix4: everything (scoped)
client side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
server side baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2 cold
all sides baseline all phases framp fill fexit inc1 top1 dec1 idle inc2 top2 dec2
highlighted cell(s) above show current scope
links point to other scopes

1. Load

Load Count
(xact/sec)		 Volume
(Mbits/sec)
offered 131.00 10.06
measured 131.00 10.05
Load trace
load.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

The load table shows offered and measured load from server side point of view. Offered load statistics are based on the request stream. Measured load statistics are based on reply messages. The 'count' column depicts the number of requests or responses.

The 'volume' column is a little bit more tricky to interpret. Offered volume is reply bandwidth that would have been required to support offered load. This volume is computed as request rate multiplied by measured mean response size. Measured volume is the actual or measured reply bandwidth.




2. Hit Ratios

Hit Ratios DHR
(%)		 BHR
(%)
offered 0.00 0.00
measured 0.00 0.00

The server-side hit ratios should always be zero. If a request reaches a server, it is, by definition, a miss.

A better way to measure hit ratio is to compare client- and server-side traffic. A hit ratio table based on such a comparison is available elsewhere.




3. Concurrent HTTP transaction level table

Transaction state Number of times Mean concurrency level
entered left
active 9494597.00 9494597.00 3.66
waiting 0.00 0.00 0.00
concurrent HTTP transaction level trace
xact.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

TBD.




4. Concurrent HTTP/TCP connection level table

Connection state Number of times Mean concurrency level
entered left
open 3884027.00 3884023.00 970.58
established 3884027.00 3884023.00 970.48
concurrent HTTP/TCP connection level trace
conn.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

TBD.




5. Population level table

Number of agents Mean population level
created destroyed
581.00 0.00 581.00
population level trace
populus.level.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

Populus is a set of all live robot or server agents. While alive, an agent may participate in HTTP transactions or remain idle.




6. Traffic stream table

Stream Contribution Rates Totals
Count
(%)		 Volume
(%)		 Count
(xact/sec)		 Volume
(Mbits/sec)		 Count
(xact,M)		 Volume
(Gbyte)
"image" 58.74 28.80 76.88 2.90 5.57 25.62
"HTML" 11.97 10.68 15.66 1.07 1.14 9.50
"download" 0.38 10.62 0.50 1.07 0.04 9.45
"other" 16.22 42.08 21.23 4.23 1.54 37.43
all content types 87.32 92.18 114.28 9.27 8.28 82.01
hits 0.00 0.00 0.00 0.00 0.00 0.00
misses 87.32 92.18 114.28 9.27 8.28 82.01
hits and misses 87.32 92.18 114.28 9.27 8.28 82.01
ims/200 2.97 2.84 3.89 0.29 0.28 2.53
ims/304 3.25 0.04 4.25 0.00 0.31 0.03
all ims 6.22 2.88 8.14 0.29 0.59 2.56
cachable 59.74 64.36 78.18 6.47 5.67 57.26
not cachable 27.58 27.82 36.10 2.80 2.62 24.75
cachable and not 87.32 92.18 114.28 9.27 8.28 82.01
fill 59.74 64.36 78.18 6.47 5.67 57.26
reload 6.05 4.40 7.92 0.44 0.57 3.91
abort 0.09 0.09 0.12 0.01 0.01 0.08
redirected request 0.00 0.00 0.00 0.00 0.00 0.00
reply to redirect 0.00 0.00 0.00 0.00 0.00 0.00
HEAD 0.01 0.00 0.02 0.00 0.00 0.00
POST 0.39 0.53 0.51 0.05 0.04 0.47
PUT 0.00 0.00 0.00 0.00 0.00 0.00
all non-gets 0.40 0.53 0.53 0.05 0.04 0.47
all replies 100.00 100.00 130.88 10.05 9.49 88.96

The 'Stream' table provides count and volume statistics for many classes of transactions. The 'Contribution' columns show count- and volume-based portions of all transactions. The 'Rates' columns show throughput and bandwidth measurements. The 'Totals' columns contain the total number of transactions and the total volume (a sum of individual response sizes) for each stream.

Note that some streams are a combination of other streams. For example, the 'all ims' stream contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' stream) or '304 Not Modified' (the 'ims/304' stream) responses.

Many combination streams, such as 'all content types' or 'hits and misses' stream, contribute less than 100% because properties like content type or hit status are distinguished for 'basic' transactions only. A basic transactions is a simple HTTP GET request resulted in a '200 OK' response. Various special transactions such as IMS or aborts do not belong to the 'basic' category.

The 'Object' table contains corresponding response time and size statistics for streams.




7. Object kind table

Object Response time (msec) Size (KBytes)
Min Mean Max Min Mean Max
"image" n/a n/a n/a 0.26 4.82 66.00
"HTML" n/a n/a n/a 0.32 8.78 70.71
"download" n/a n/a n/a 27.23 272.93 1704.34
"other" n/a n/a n/a 6.20 25.50 86.27
all content types n/a n/a n/a 0.26 10.38 1704.34
hits n/a n/a n/a n/a n/a n/a
misses 0.00 2532.76 16806.00 0.26 10.38 1704.34
hits and misses 0.00 2532.76 16806.00 0.26 10.38 1704.34
ims/200 0.00 2529.57 14371.00 0.26 9.41 1554.51
ims/304 0.00 2504.95 6671.00 0.06 0.12 0.13
all ims 0.00 2516.71 14371.00 0.06 4.55 1554.51
cachable 0.00 2534.42 16806.00 0.32 10.59 1704.34
not cachable 0.00 2529.16 14195.00 0.26 9.92 1117.80
cachable and not 0.00 2532.76 16806.00 0.26 10.38 1704.34
fill 0.00 2534.42 16806.00 0.32 10.59 1704.34
reload 0.00 2519.91 15714.00 0.26 7.15 1554.51
abort 1.00 2524.05 6146.00 0.28 10.34 483.93
redirected request n/a n/a n/a n/a n/a n/a
reply to redirect n/a n/a n/a n/a n/a n/a
HEAD 1.00 2521.95 5797.00 0.27 0.33 0.41
POST 1.00 2549.68 10726.00 0.32 13.41 1004.70
PUT n/a n/a n/a n/a n/a n/a
all non-gets 1.00 2548.78 10726.00 0.27 12.98 1004.70
all replies 0.00 2531.05 16806.00 0.06 9.83 1704.34

The 'Object' table provides response time and response size statistics for many classes of transactions.

Note that some classes are a combination of other classes. For example, the 'all ims' class contains transactions with If-Modified-Since requests that resulted in either '200 OK' (the 'ims/304' classe) or '304 Not Modified' (the 'ims/304' classe) responses.

Some statistics may not be available because either no objects of the corresponding class were seen during the test or no facilities to collect the stats exist for the class. The former can be verified using a 'Stream' table.




8. Errors

No errors detected in the given scope.


9. Object '"image"'

contribution: 58.74% by count and 28.80% by volume
rates: 76.88xact/sec or 2.90Mbits/sec
totals: 5.57Mxact and 25.62GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.26KBytes min, 4.82KBytes mean, and 66.00KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "image".


10. Object '"HTML"'

contribution: 11.97% by count and 10.68% by volume
rates: 15.66xact/sec or 1.07Mbits/sec
totals: 1.14Mxact and 9.50GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.32KBytes min, 8.78KBytes mean, and 70.71KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "HTML".


11. Object '"download"'

contribution: 0.38% by count and 10.62% by volume
rates: 0.50xact/sec or 1.07Mbits/sec
totals: 0.04Mxact and 9.45GByte
response time: n/a min, n/a mean, and n/a max
response size: 27.23KBytes min, 272.93KBytes mean, and 1704.34KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "download".


12. Object '"other"'

contribution: 16.22% by count and 42.08% by volume
rates: 21.23xact/sec or 4.23Mbits/sec
totals: 1.54Mxact and 37.43GByte
response time: n/a min, n/a mean, and n/a max
response size: 6.20KBytes min, 25.50KBytes mean, and 86.27KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


This object class represents one of the content types specified in the PGL workload file and labeled there as "other".


13. Object 'all content types'

contribution: 87.32% by count and 92.18% by volume
rates: 114.28xact/sec or 9.27Mbits/sec
totals: 8.28Mxact and 82.01GByte
response time: n/a min, n/a mean, and n/a max
response size: 0.26KBytes min, 10.38KBytes mean, and 1704.34KBytes max

No response time and size histograms were collected or stored for this object class.

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all replies' class.




14. Object 'hits'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'hits and misses' class.




15. Object 'misses'

contribution: 87.32% by count and 92.18% by volume
rates: 114.28xact/sec or 9.27Mbits/sec
totals: 8.28Mxact and 82.01GByte
response time: 0.00msec min, 2532.76msec mean, and 16806.00msec max
response size: 0.26KBytes min, 10.38KBytes mean, and 1704.34KBytes max
response time distribution
object.misses.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.misses.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.misses.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'hits and misses' class.




16. Object 'hits and misses'

contribution: 87.32% by count and 92.18% by volume
rates: 114.28xact/sec or 9.27Mbits/sec
totals: 8.28Mxact and 82.01GByte
response time: 0.00msec min, 2532.76msec mean, and 16806.00msec max
response size: 0.26KBytes min, 10.38KBytes mean, and 1704.34KBytes max
response time distribution
object.hits_and_misses.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.hits_and_misses.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.hits_and_misses.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




17. Object 'ims/200'

contribution: 2.97% by count and 2.84% by volume
rates: 3.89xact/sec or 0.29Mbits/sec
totals: 0.28Mxact and 2.53GByte
response time: 0.00msec min, 2529.57msec mean, and 14371.00msec max
response size: 0.26KBytes min, 9.41KBytes mean, and 1554.51KBytes max
response time distribution
object.ims_sc200.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_sc200.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




18. Object 'ims/304'

contribution: 3.25% by count and 0.04% by volume
rates: 4.25xact/sec or 0.00Mbits/sec
totals: 0.31Mxact and 0.03GByte
response time: 0.00msec min, 2504.95msec mean, and 6671.00msec max
response size: 0.06KBytes min, 0.12KBytes mean, and 0.13KBytes max
response time distribution
object.ims_sc304.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_sc304.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No response time and size traces are collected for this object class.


No description is available for this object class.

This object class belongs to the 'all ims' class.




19. Object 'all ims'

contribution: 6.22% by count and 2.88% by volume
rates: 8.14xact/sec or 0.29Mbits/sec
totals: 0.59Mxact and 2.56GByte
response time: 0.00msec min, 2516.71msec mean, and 14371.00msec max
response size: 0.06KBytes min, 4.55KBytes mean, and 1554.51KBytes max
response time distribution
object.ims_scAll.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.ims_scAll.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.ims_scAll.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




20. Object 'cachable'

contribution: 59.74% by count and 64.36% by volume
rates: 78.18xact/sec or 6.47Mbits/sec
totals: 5.67Mxact and 57.26GByte
response time: 0.00msec min, 2534.42msec mean, and 16806.00msec max
response size: 0.32KBytes min, 10.59KBytes mean, and 1704.34KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.cachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




21. Object 'not cachable'

contribution: 27.58% by count and 27.82% by volume
rates: 36.10xact/sec or 2.80Mbits/sec
totals: 2.62Mxact and 24.75GByte
response time: 0.00msec min, 2529.16msec mean, and 14195.00msec max
response size: 0.26KBytes min, 9.92KBytes mean, and 1117.80KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.uncachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'cachable and not' class.




22. Object 'cachable and not'

contribution: 87.32% by count and 92.18% by volume
rates: 114.28xact/sec or 9.27Mbits/sec
totals: 8.28Mxact and 82.01GByte
response time: 0.00msec min, 2532.76msec mean, and 16806.00msec max
response size: 0.26KBytes min, 10.38KBytes mean, and 1704.34KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.all_cachable.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




23. Object 'fill'

contribution: 59.74% by count and 64.36% by volume
rates: 78.18xact/sec or 6.47Mbits/sec
totals: 5.67Mxact and 57.26GByte
response time: 0.00msec min, 2534.42msec mean, and 16806.00msec max
response size: 0.32KBytes min, 10.59KBytes mean, and 1704.34KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.fill.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




24. Object 'reload'

contribution: 6.05% by count and 4.40% by volume
rates: 7.92xact/sec or 0.44Mbits/sec
totals: 0.57Mxact and 3.91GByte
response time: 0.00msec min, 2519.91msec mean, and 15714.00msec max
response size: 0.26KBytes min, 7.15KBytes mean, and 1554.51KBytes max
response time distribution
object.reload.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.reload.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.reload.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




25. Object 'abort'

contribution: 0.09% by count and 0.09% by volume
rates: 0.12xact/sec or 0.01Mbits/sec
totals: 0.01Mxact and 0.08GByte
response time: 1.00msec min, 2524.05msec mean, and 6146.00msec max
response size: 0.28KBytes min, 10.34KBytes mean, and 483.93KBytes max

No response time and size histograms were collected or stored for this object class.

response time trace
object.abort.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




26. Object 'redirected request'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




27. Object 'reply to redirect'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all replies' class.




28. Object 'HEAD'

contribution: 0.01% by count and 0.00% by volume
rates: 0.02xact/sec or 0.00Mbits/sec
totals: 0.00Mxact and 0.00GByte
response time: 1.00msec min, 2521.95msec mean, and 5797.00msec max
response size: 0.27KBytes min, 0.33KBytes mean, and 0.41KBytes max
response time distribution
object.method_head.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_head.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_head.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




29. Object 'POST'

contribution: 0.39% by count and 0.53% by volume
rates: 0.51xact/sec or 0.05Mbits/sec
totals: 0.04Mxact and 0.47GByte
response time: 1.00msec min, 2549.68msec mean, and 10726.00msec max
response size: 0.32KBytes min, 13.41KBytes mean, and 1004.70KBytes max
response time distribution
object.method_post.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_post.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_post.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all non-gets' class.




30. Object 'PUT'

No instances of this object class were observed or recorded in the given scope.


No description is available for this object class.

This object class belongs to the 'all non-gets' class.




31. Object 'all non-gets'

contribution: 0.40% by count and 0.53% by volume
rates: 0.53xact/sec or 0.05Mbits/sec
totals: 0.04Mxact and 0.47GByte
response time: 1.00msec min, 2548.78msec mean, and 10726.00msec max
response size: 0.27KBytes min, 12.98KBytes mean, and 1004.70KBytes max
response time distribution
object.method_all.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.method_all.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.method_all.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.

This object class belongs to the 'all replies' class.




32. Object 'all replies'

contribution: 100.00% by count and 100.00% by volume
rates: 130.88xact/sec or 10.05Mbits/sec
totals: 9.49Mxact and 88.96GByte
response time: 0.00msec min, 2531.05msec mean, and 16806.00msec max
response size: 0.06KBytes min, 9.83KBytes mean, and 1704.34KBytes max
response time distribution
object.rep.rptm.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
object size distribution
object.rep.size.fig.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold
response time trace
object.rep.rptm.trace.scope=sides=server__phases=framp,fill,fexit,inc1,top1,dec1,idle,inc2,top2,dec2,cold

No description is available for this object class.